how to make monitors!!!!!!!!!!

  • Thread starter Thread starter marshall.amps
  • Start date Start date
M

marshall.amps

New member
do u think i could take 2 stereo speakers and soder on 1/4 inputs onto the end of the stereo wire and use them as monitors
 
Last edited:
marshall.amps said:
do u think i could take 2 stereo speakers and soder on 1/4 inputs onto the end of the stereo wire and use them as monitors

well,...mmmmm.......hell yeah,.....go for it!!! But make sure you use two stereo speakers!!. and no soder!! :D

Seriously?............nup!
Do a forum/google search on differences between hi-fi speakers (u call them stereo speakers?) and studio monitors....you may be amazed, or then again, u may not be. :rolleyes:

All the best! :)
 
tnjazz said:
Having a 1/4 input doesn't make it a monitor. :rolleyes:

sure it does. :D it makes those awai bookshelf's p r o FESH i o n a l.
 
I thought this was going to be some left-of-center DIY project!! Too bad.
 
marshall.amps said:
do u think i could take 2 stereo speakers and soder on 1/4 inputs onto the end of the stereo wire and use them as monitors

Whos alter-asshole is this? Its rather annoying, please stop trying be like that 'Walter' guy and post your jokes in the cave.
 
You could just run stereo outs from your soundcard (recorder, mixer...) into your stereo system, until you can pick up some actual monitors. Then you can go back to having your stereo system un-molested when you have mon's. There are some useful monitors out there that can be had cheap.
 
I took my Digital P&S Camera and ripped the lens off. I now have a Digital SLR!!!!!
:)
 
"Joke post" or not - The best monitoring I've ever used were all "HiFi" speakers... All of them.

Except the Genelecs... Those were quite good.

But everything else - and not just for mastering (where you almost *always* find audiophile HiFi gear).

Certainly, most "off the shelf" bookshelf speakers at BestBuy aren't going to cut it. But there are many - B&W (602's, 805's, so many more), JBL (S-38's), Sonus Faber... The list would go on and on.

Just because something says "Studio Monitor" on it doesn't make it "flat" or "accurate" or anything else - It means that there's a sticker on it that say "studio monitor." And just because something *doesn't* say "studio monitor" on it doesn't mean that it's *not* relatively accurate.

Of course, the room is going to play a huge role in any system - But I've always switched over to the "studio monitors" just to see what the mixes would sound like on small, crappy, narrow-dispersion, short-throw, limited range speakers. I did the rest of the work on the speakers that actually sounded good. In a poorly treated room, I suppose I'd actually *want* short-throw, limited range, narrow-dispersion boxes (a.k.a. "nearfield studio monitors"). But in any case, I'd rather just fix the room.

At the original post - Changing the connector on a speaker doesn't do anything but change the connector. And not to "assume" anything, but if the speaker has built-in wire coming out of it with a plug on the end, it's probably not the speaker you're looking for. The only time you really see that are with really crappy "kiddie stereo in the Brady's Rec Room" stuff. Usually...
 
Massive Master said:
Just because something says "Studio Monitor" on it doesn't make it "flat" or "accurate" or anything else - It means that there's a sticker on it that say "studio monitor."

yea, i found that out the hard way. :D marketing is a real mofo.
 
Back
Top