How do i hook up my m-audio dmp3 to my m-box2?

  • Thread starter Thread starter BAMA
  • Start date Start date
Status
Not open for further replies.
B

BAMA

New member
I'M TRYING TO RUN MY PRE AMP THROUGH MY M BOX 2 BUT CAN'T QUITE SEEM TO GET A RESPONSE THROUGH MY MY AND I HAVE THE PHATOM POWER TURN ON. ON MY DMP3 AND M BOX 2:confused:
 
first off....turn the caps lock off on your keyboard

second, turn the phantom power off on the Mbox.
third, tell us how you have things wired.
 
This is the way i have the pre amp and m box wired

My conderser mic cord plug into the preamp and the other cord plug into the m box in the input 1 section:confused:
 
BAMA said:
My conderser mic cord plug into the preamp and the other cord plug into the m box in the input 1 section:confused:
Click to expand...

yep, you're going to have to be a tad more specific than that!

Use words like XLR, 1/4" jack, line input/output etc to help us understand what you're doing!

XLR:

540px-XLR_pinouts.svg.png


1/4" jack:
1-4-Jack-Plug-Connector-TS3300-.jpg
 
Balanced output of channel A of DMP3 > LINE INPUT of M Box via small TRS cable. Keep it balanced for best S/N ratio.

Be sure to turn down volume on both units, and as previously mentioned, disable PHANTOM power prior to powering DMP3.

I love my DMP3! Just a fantastic buy/sound, even though my VU meters have burned out.

Great value.

The Toad.
 
Status
Not open for further replies.
Back
Top