Hooking up multiple Boss Pedals

[worldinmyeyes]

I finally bought the connections to hook up all of my boss pedals, I was even told by the sales guy which order they should go in...only it doesn't work. I can get them all powered up but reeive go guitar signal once they're all connected. I have a boss tuner, a phase shifter , a digital delay(dd6) , a metal zone, and a blues driver. How might I hook this up? Any help is much appreciated.

 

[72fender]

Check BOSS http://www.bossus.com/ or the guitar forum. Most people come here for recording advice, make sure that you're using the right power supply and your connection cords are good.

 

[thehouseofshawn]

Might have a faulty connection (your cable you always use - the problem I always have) or the output of the pedals might be down. Mess with knobs and stuff...and then take it back to them. Don't worry, you won't feel stupid. They have a standard for us guitar players. Cables confused me for a long time.

 

[Farview]

You might have the tuner in 'mute' mode.
You might have a bad cable.
you might have one or more pedal hooked up backwards.

Hook up one pedal at a time and check to if it works. When it stops working, the problem is with what you just added.

 

[sile2001]

Just so you'll know...posting the same question in several different forums is generally frowned upon. Cross-posting is a no-no on message boards.

 

[glimmer_doll]

Just so you'll know...posting the same question in several different forums is generally frowned upon. Cross-posting is a no-no on message boards.

you took the words right out of my mouth (it must have been while you were kissing me?)

cross-posting is totally not cool...cross dressing on the other hand