H
Harvey Gerst
New member
Re: drum tuning (sorry, a little OT)?
As a general rule, studio drums are usually tuned a little lower than for live shows, since we don't need the extra volume you get by tuning them higher.
I usually start by tapping the side of the drum to determine its natural resonant point and try to tune the top head to that. The bottom head is tuned just a little bit lower to add some ring and sustain to the sound. In the case of kick drums, the back head (the head furthest from the pedal) isn't tuned at all, just tightened enough to take up the slack.
The snare is the hardest usually to tune. You tune it by tapping lightly near the lug, and trying to get all the lugs tuned to the same pitch. Again, the bottom head is usually tuned just a little bit lower.
For recording, we usually use coated Ambassadors on all the top heads.
Drum tuning is a hard skill to master. Most of the drummers who come in to our studio don't know how to tune drums. One of the best ways to learn is to find a good drum teacher who can show you how to learn to tune drums. It all depends on the drums themselves, the style of music being recorded, and the final desired sound.cordura21 said:hi Harvey. In the great polar patterns thread you talked a little about drum tuning, then you said it was better for someone to read the Tuning Bible.
I did it, but I found it a little too detailed. Do you have another good link , or did you write something about it?
I know this is the microphone forum, but I guess drum tuning is often overlooked and it is sure the cause of bad sounding drums for home recorders.
Cheers, Andrés
As a general rule, studio drums are usually tuned a little lower than for live shows, since we don't need the extra volume you get by tuning them higher.
I usually start by tapping the side of the drum to determine its natural resonant point and try to tune the top head to that. The bottom head is tuned just a little bit lower to add some ring and sustain to the sound. In the case of kick drums, the back head (the head furthest from the pedal) isn't tuned at all, just tightened enough to take up the slack.
The snare is the hardest usually to tune. You tune it by tapping lightly near the lug, and trying to get all the lugs tuned to the same pitch. Again, the bottom head is usually tuned just a little bit lower.
For recording, we usually use coated Ambassadors on all the top heads.