FP 10 and this card????

[Slowrider]

http://www.firewire-1394.com/pyro-pci-64.htm

Does anyone use this card? My FP 10 arrived today, but I thought I'd check with you experts before I buy This. Thanks in Advance

 

[cusebassman]

It looks like its got a Texas Instruments chipset, which I recall is correct for getting the most compatibility across the board in terms of interfaces. I'd say you are safe

 

[andyhix]

That should do the trick just fine. Order it! You need to start playing with the FP!

 

[Slowrider]

Thank you, Gentlemen! I'll order it.

 

[Dogman]

I know nothing about the card, but I use my Firepod with an old firewire card, and it works flawlessly for me. Have fun...

 

[RocknRollOver]

You must be going nuts having the Firepod and no card yet


Let us know how it goes !

 

[Slowrider]

You must be going nuts having the Firepod and no card yet


Let us know how it goes !

You are SO right! So, I plugged my Ric into ch. 1, headphone output to the powered monitors first, then the Peavey SP3s.

Damn that signal is CLEAN.

 

[Slowrider]

Installed the card, then went to Presonus web and updated to 2.14 and recorded 2 bass, 1 guitar track! Crystal clear, 1.2ms latency, but have to figure out how to get the tracks in sync?

I might just be able to figure this bitch out and quit asking all these questions

Thanks again, guys!!

 

[Slowrider]

I got another one.....has anybody tried to run their old tapes through Reaper?


I've got analog tracks from 2-40 yrs ago that I can build on. Just curious?

 

[RocknRollOver]

It sounds like you recorded a few tracks, I assume you were recording one while playing back another ?

They should be audibly aligned, meaning you shouldn't be able to hear the
1.2ms latency, if thats what your talking about.
I never mess with mine but maybe I should, I'd like to know more about this

Everything I've brought in to Reaper so far has been digital, I haven't played one of my old tapes in a long time.
I'm trying to get more and more familiar with Reaper myself, I really like it so far.

All in all, It sounds like the card install and interface install went good, glad to hear it, sometimes they can be a little finiky and you feel like getting out the hammer to make it right