EQ tweaking help?

[Michael Romeo]

hello,

im using a line6 POD2.0 into my mixer,

how would you recommend tweaking?

should i set the EQ on the mixer to 12 o'clock? and tweak the POD,

or should i set the POD's EQ to 12 o'clock? and tweak the mixer,
im not really to sure what to do, to get the most out of my gear

thanks, i hopw this is in the right forum, if not feel free to move it, dont delete it

thanks again

 

[travelin travis]

all that really matters is the end result so it really does'nt matter. if it were me though, i'd get as close to the sound i wanted out of the pod and then tweak the board eq.

experimenting can turn up some cool sounds though.

 

[Michael Romeo]

yeah, but because the POD is always running through the Mixer,
the EQ is on regardless,
so i was just looking for some advice as in "what" to have the EQ on the mixer set to While tweaking the POD.

cheers!





when i looked at your avatar i thought it was Ren from the ren and stimpy show LOL!

 

[metalhead28]

Yeah, just whatever sounds best . If you want to hear the truest results from using the POD's EQ, set the mixer's Eq flat.

By the way, you really kick ass in Symphony X.

 

[Michael Romeo]

Yeah, just whatever sounds best . If you want to hear the truest results from using the POD's EQ, set the mixer's Eq flat.

By the way, you really kick ass in Symphony X.

Flat as in 0% ?

okay so work on the tone coming directly from the POD, and just use the mixers EQ to enhace it?

ill have a fiddle, thanks for the quik responses, i wish i knew about this forum a few years ago



and thanks LOL! MJR is one of my gods

 

[metalhead28]

Yeah, flat as in minus nothing and plus nothing. Zero, or however that looks on your mixer.

I would try it both ways actually. You never know, you might like the sound of the EQ on the board better. You might like a little of both. This is a good time for experimentation.

 

[Michael Romeo]

thanks