dmp3 opamp, what is it?

  • Thread starter Thread starter eeldip
  • Start date Start date
eeldip

eeldip

New member
everyone around here seems to be a dmp3 fan.

question: what sort of opamp chip is in it?

and if anyone knows anything about circuit design,
how does the circuit look? good design? some serious compromises? or just plain simple?
 
eeldip said:
everyone around here seems to be a dmp3 fan.

question: what sort of opamp chip is in it?

and if anyone knows anything about circuit design,
how does the circuit look? good design? some serious compromises? or just plain simple?
Click to expand...
I've often wondered the same thing. Can someone pop the cover off one (that's out of warranty, of course) and post what's written on the ICs inside?
 
AFAIK it is build around the ssm 2017. Or was it the INA103 ?
 
The Analog Devices SSM 2017 is not in production anymore. If they ever used it, they probably switched to a Burr Brown. The INA 217 (I think) is a pin compatible replacement, but there's also other Burr Browns (like the INA163) for the same purposes.
 
Rossi said:
The Analog Devices SSM 2017 is not in production anymore. If they ever used it, they probably switched to a Burr Brown. The INA 217 (I think) is a pin compatible replacement, but there's also other Burr Browns (like the INA163) for the same purposes.
Click to expand...

I know that it is out of production. And there is no pin compatible replacement so far (no, even the THAT 1520 won't work, different resistor values for gain setting, and ina 103 and 163 are completely different). This is not really a problem until you don't have to replace that chip (its a surface mount 14 pin package, if I remember right), and I am shure that M audio and other companies that use them for their preamp designs (like earthworks, dbx and symmetrix) bought them in quantities of a couple of thousands, so I guess they can continue building preamps with this chip for the next decade. This is the fun thing about building a device around a single chip, because you never know when a chip company decides to discontinue that certain IC.
how's the weather in Saarbrücken :) ?
 
Hey, you're El Mariachi, right? It's pretty cold here, as you can imagine, there might be snow tomorrow.

Well, I don't know that much about electronics, but the INA217 is said to be a replacement: http://focus.ti.com/docs/prod/folders/print/ina217.html

Burr Browns are pretty popular right now. I think a while ago someone mentioned that the DMP3 is based on a Burr Brown chip, but I wouldn't know which. I don't think they ever used an SSM 2017 as it probably was already out of production when it was designed. But maybe they used in the DMP2, who knows? Companies change chips all the time. I opened all my Behringer rack gear a while ago and compared different revisions of the Composer and other stuff. While the layout essentially remains the same there is some variation on chips used. Early composers for instance have DBX chips, later ones use THAT replacements. In-between there's some that have DBX chips with a drop of paint over the DBX logos. They also used quite a variety of different op amps after they ran out of their own Behringer chips.
 
You must log in or register to reply here.
Back
Top