Delta 44 Panning/Stereo issues

[Mojoman71]

Here is my problem. I cannot get a stereo signal. I am comming out of outputs 1 & 2 on the delta with mono 1/4 inch cables into a stereo splitter into a headphone amp. I still only have left signal for all tracks I have them panned in my software: track 1 hard left and track 2 panned hard right. The right panned tracks are not even heard. Panning in the delta control panel does nothing. I am using Cool Edit Pro 2 under winXP

Any Ideas?

Brian

 

[scrubs]

I imagine it's your "stereo splitter" that is causing the problem (output 1 should go directly to the left input on your headphone amp and output 2 should go directly to the right input), but also make sure the outputs 1/2 in the Delta control panel are set to "monitor/mixer" and that is panned to the center.

 

[EdJames]

I'm having exactly the same problem!

Stereo splitter lead from the Delta card straight into a Sony amplifier but as soon as I pan anything to the right on Adobe Audition I can't hear it!

 

[OhSh1rt]

Your "stereo" spliter must just be like one I found laying around, two male 1/4'' mono's into a single female 1/4'' that is mono. Don't cheap headphone (berihnger) amps have an input for left and right signals?


-jeffrey

 

[cellardweller]

Out of curiosity, what is your patchbay/router thingy (Delta tray icon) set on for outputs 1&2??