Hi all, long time lurker! I just ordered a cl-2 to use in the studio for the sm7b and ribbon mics, but I saw this reviewer on amazon in regards to the cl-1 which makes me nervous it says "I had to use a longer than 10 foot cord from the box to the recorder or the recorder shut off. Maybe the phantom power needed more cord to not overpower the unit."
I don't think this will be a problem but I don't want to risk frying my recorder(tascam dp-24) either. I ordered some bulk canare star quad cable and neutrik connectors and wondering if I should be running short or long to the cl-2 > dp-24? I will try and keep the length as short as possible between the mic > cl-2, but not sure what to do about running from the cl-2 into the mixer. I am guessing the guy is having other issues, but i've no experience with these devices yet, should receive it tomorrow to play with,
Any advice would help,
Thanks!
I don't think this will be a problem but I don't want to risk frying my recorder(tascam dp-24) either. I ordered some bulk canare star quad cable and neutrik connectors and wondering if I should be running short or long to the cl-2 > dp-24? I will try and keep the length as short as possible between the mic > cl-2, but not sure what to do about running from the cl-2 into the mixer. I am guessing the guy is having other issues, but i've no experience with these devices yet, should receive it tomorrow to play with,
Any advice would help,
Thanks!