D
B
Big Kenny
New member
In Class A the output signal is directly proportional to the input; hence the name of linear amplifier
Class B amplifiers that are biased at cutoff
Class AB is used in HAM radio operation
theres more but I forget
Solid State means no tubes
just found this:https://homerecording.com/bbs/showthread.php?t=111727
Class B amplifiers that are biased at cutoff
Class AB is used in HAM radio operation
theres more but I forget
Solid State means no tubes
just found this:https://homerecording.com/bbs/showthread.php?t=111727
northsiderap
New member
Class A - Class B
Class B will take a signal and split it in half and amplify the two halves. Then the signal is re-spliced on the output. Occasionally there is distortion where the two halves meet back up if both sides of the amplifier don't EXACTLY match. In a well designed system, you won't be able to tell.
Class B uses less power than class A.
Class A forces the WHOLE signal through an amplifying device, no splitting, splicing, or "crossover distortion."
A poorly designed class A amp will not sound better than a well-designed class B amp.
Most people will not be able to tell the difference between the two classes if they are properly built.
Class B will take a signal and split it in half and amplify the two halves. Then the signal is re-spliced on the output. Occasionally there is distortion where the two halves meet back up if both sides of the amplifier don't EXACTLY match. In a well designed system, you won't be able to tell.
Class B uses less power than class A.
Class A forces the WHOLE signal through an amplifying device, no splitting, splicing, or "crossover distortion."
A poorly designed class A amp will not sound better than a well-designed class B amp.
Most people will not be able to tell the difference between the two classes if they are properly built.
giraffe
i love negative rep
D
dougedmunds
New member
giraffe said:
Thanks. Based on what I read, a spec that the mic is "Class A" has nothing
to do with quality, but more like saying this is a buck and that's 4 quarters?
Treeline
New member
Here's a quick primer:
http://www.duncanamps.com/technical/ampclasses.html
Now who in the class can tell me what Class H means?
Hint: A Class H amp fools around with voltage levels, is very efficient (lots of punch for the juice it uses) and as my back will attest, VERY heavy.
http://www.duncanamps.com/technical/ampclasses.html
Now who in the class can tell me what Class H means?
Hint: A Class H amp fools around with voltage levels, is very efficient (lots of punch for the juice it uses) and as my back will attest, VERY heavy.
D
DonGraham
New member
Treeline said:Here's a quick primer:
http://www.duncanamps.com/technical/ampclasses.html
Now who in the class can tell me what Class H means?
Hint: A Class H amp fools around with voltage levels, is very efficient (lots of punch for the juice it uses) and as my back will attest, VERY heavy.
If I remember right class H amplifiers modulate the rail voltage using the input signal...............I think my old souncraftsmen amplifier was class H........weighed about 70lbs was about 300watts@8 Ohms
E
easychair
New member
DonGraham said:If I remember right class H amplifiers modulate the rail voltage using the input signal...............I think my old souncraftsmen amplifier was class H........weighed about 70lbs was about 300watts@8 Ohms
Everything was heavy in those days. With switching technology, class H is very low weight, just like anything else.
P
paddyponchero
New member
dougedmunds said:
The term "Class A" has come to imply quality sound because of the legacy of great vintage gear and indeed some modern gear that uses that topology. In reality it says nothing about the sound or quality of a design. "Solid state" merely implies that there are no valves in the circuit.
In something like the nova mic "Class A" is used because its the simplest topology and is thus small and cheap to produce.