Case for Nady TCM1150 / Apex 460 ?

[amzavareei]

Hey, this mic comes in cardboard box. At least the Nady. I've moded the hell out of it, and now I'm looking for a hard shell case for it to complete the package. Anyone know of one that would fit? Inside the box there is a nice cut out foam block that has compartments for the power supply, the mic, the shock mount and the cable. It's dimensions are 15.5"x11". I forget the height. I think it's about 4 inches. It would be nice to have a case that this foam could fit snugly into with the same inner dimensions. Having to cut new foam would be no problem I guess, though. Thanks!

 

[scrubs]

I'm not sure of the exact dimensions, but I have a couple of hard tool cases that you can find at Harbor Freight, Lowes, Home Depot, etc. They are big enough to hold several mics and have scored foam blocks inside that can be punched out to fit your mics.

This is not the exact one I have, but is similar:
http://www.harborfreight.com/cpi/ctaf/Displayitem.taf?itemnumber=36870

 

[alba123]

What were the mods and how did they turn out? How difficult were they? Thanks

 

[PhilGood]

Here we go again!

 

[homestudioguy]

Hey, this mic comes in cardboard box. At least the Nady. I've moded the hell out of it, and now I'm looking for a hard shell case for it to complete the package. Anyone know of one that would fit? Inside the box there is a nice cut out foam block that has compartments for the power supply, the mic, the shock mount and the cable. It's dimensions are 15.5"x11". I forget the height. I think it's about 4 inches. It would be nice to have a case that this foam could fit snugly into with the same inner dimensions. Having to cut new foam would be no problem I guess, though. Thanks!

Carvin sells their Apex 460 clone with a hardshell case.
They might just sell one if you ask nicely.....
But first, you must ask.

 

[Micter]

Carvin sells their Apex 460 clone with a hardshell case.
They might just sell one if you ask nicely.....
But first, you must ask.

They won't

 

[bair_ohio]

If you are crafty at all. Take the measuremants of the foam insert it came in and just make your own of wood. It really wouldnt be too hard. Ive got the 1150 and will probably end up doing this.

 

[alba123]

www.thecontainerstore.com

My wife got a case for some of my mics from The Container Store in San Antonio. www.thecontainerstore.com They sell "comercial-grade" black cases from 10"x7 1/2"x4"h to 26"x15 9/16"x9"h. Prices are high about $8 to $60 and you have to buy the foam seperately.