Creamyapples1
www.murphycabs.com
...A module that will accept a midi keyboard with 1/4 audio outputs? Or atleast point me to (preferably older) model numbers, etc. <3
noisewreck
New member
I don't think your question makes sense.
Are you looking at some synth module that will basically have 1/4" audio inputs? If so, you can either look at older analog synths or something like the K2600RS.
Can you please elaborate as to what you're trying to do?
Are you looking at some synth module that will basically have 1/4" audio inputs? If so, you can either look at older analog synths or something like the K2600RS.
Can you please elaborate as to what you're trying to do?
Creamyapples1
www.murphycabs.com
like...something with 1/4 audio outs to plug a midi keyboard into. Kinda like the Roland MT32. Just looking for other options out there before I go dropping some cash on stuff I have no clue about. Thanks for the reply!
DavidK
New member
Still not making sense.
95% of synths have a 1/4 inch audio output. The only one I own that doesnt is an Alesis Nanosynth, which is as budget as they made. It has rca jacks. THEREFORE, a trip to Radio Shack gets you an rca>1/4 inch adaptor for 2 bucks.
ssscientist
Info you can use...
I'm with Noisewreck --- your question makes no sense. Even the 2nd time.
Are you possibly confusing the functions of a midi jack and a 1/4" input?
The 1/4" jacks on the MT32 are outputs, not inputs. And as Noisewreck points out there ARE some relatively expensive midi modules that do have 1/4" inputs, but if you're looking for something inexpensive those would be out of your price range.
You can find General Midi modules for very little these days, and they will sound a whole lot better than the 20 year old MT32. One suggestion would be to go on your local craigslist and look for a Yamaha PSR series --- that would make getting a module and separate keyboard unnecessary since the PSR are keyboards with GM/XG sounds.
.
Are you possibly confusing the functions of a midi jack and a 1/4" input?
The 1/4" jacks on the MT32 are outputs, not inputs. And as Noisewreck points out there ARE some relatively expensive midi modules that do have 1/4" inputs, but if you're looking for something inexpensive those would be out of your price range.
You can find General Midi modules for very little these days, and they will sound a whole lot better than the 20 year old MT32. One suggestion would be to go on your local craigslist and look for a Yamaha PSR series --- that would make getting a module and separate keyboard unnecessary since the PSR are keyboards with GM/XG sounds.
.
Creamyapples1
www.murphycabs.com
You guys are taking it too literal, meh thinks. Okay, I plug a midi keyboard into said decive, then run out of said device using normal audio outputs to say, a mixer. I don't know what I don't know here, trying the best I can. 
ssscientist
Info you can use...
You are looking for what we keyboard guys call a 'sound module' or a 'midi expander' or some such.
Try local pawn shops and, again, your local craigslist.
And you'll need at least one midi cable to plug the keyboard into the sound module.
.
Try local pawn shops and, again, your local craigslist.
And you'll need at least one midi cable to plug the keyboard into the sound module.
.
DavidK
New member
You guys are taking it too literal, meh thinks. Okay, I plug a midi keyboard into said decive, then run out of said device using normal audio outputs to say, a mixer. I don't know what I don't know here, trying the best I can.
A used Roland JV1010 would be a great place to start. Check Ebay, they are probably less than $200 and pretty good, you will be surprised.
