Can anybody help me? Cable question.

  • Thread starter Thread starter AlexHerd
  • Start date Start date
A

AlexHerd

New member
Ok so, Im going to be using the Samson Mixpad 4 to be doing some remote recording, and I'm going to record to minidisc. My question is this, the outs on the Mixpad are 2 mono 1/4 inch (see http://www.micsupply.com/mixpadbig.htm ), the imput on a MD is stereo 1/8 inch. Does anyone know if such a cable exists so that I could record in stereo to the MD? where I could find it? THANKS!
 
Last edited:
They should have those 1/4 to 1/8"cables as I have 2 of 'em.
If not, check for 1/8 or 1/4" adapters that will convert cables for
various connections.
 
does the 1/4 to 1/8 have 2 mono 1/4 to 1 stereo 1/8? I hate their website, I cant find anything.
 
R-U looking for a "Y" double quarter inch-to-1/8 " cable?

They have interchangeable "Y" adapters for your needs or check
www.samash.com .
 
I had to do a similar thing awhile ago.
They have what you need at radio shack, but it'll be a series of adapters.

You need:
(2)- RCA to 1/4 Phono (Mono) adapters
(1)- Single Stereo 1/4 to Dual RCA Phono adapter.
(unless they have stereo 1/8 to dual RCA phono adapter, then you can get that and skip the next adapter)
(1)- a stereo 1/8 to stereo 1/4 adapter

and there you go!
Got all that at radio shack, totalled about $7 or $8
 
You must log in or register to reply here.
Back
Top