Don't be afraid of the Behringer gear. You can get a bad piece of gear from anyone. Shit happens.... besides there are alot of things that can introduce noise into the recording. The less gear or connections in the signal path the better.
I have heard, what I consider to be good or at least acceptable, recordings done with directs into a built in soundcard and a headphone/mic setup, (the point is the less gear the better). The other point,and not to be understated, is knowing how or the best way to use what you have. In most cases I mean your software and PC.
Some of what I consider to be the most important considerations.
1. Take your time and shop around. Buy only what you need as you need it.
2. Make sure your power supply is ample and well grounded. No loose connections at the breaker or recpetacles. If these are not tight, they will build up heat and loosen, becoming potentially dangerous and introduce noise as well.
3. Always buy the best cables. This could be more important than buying the next piece of equipment. If you have to buy the cheap ones I understand, but this can be a source of problems and noise. Loose connections in either the gear or at the end of the cable is going to be a potential problem as well.
4. Buy a mixer with at least 4 stereo inputs. IMHO anything less will limit you in a home studio. (I can not remember which of the Behringers model numbers it is, but MF use to sell it for $299.99 I think I recently saw it for $329.99. A good friend of mine uses one and so far we have had verey good results with it.)
I agree with what the people who admitted to using Behringer had to say and some of what those who thought it was crap had to say. You will probably buy some gear no matter which way you go that you don't like, but hopefully spending your time before you spend your money will help eliminate some of that for you.
Just my opinion, Ozlee
