Behringer Xenyx x1832 USB Mac driver problems

[Dinopresley]

Alright, so, I'm a pretty hardcore newb. I just purchased a (lightly) used Behringer Xenyx x1832 usb in hopes of officially starting my journey in the world of home studio-recording. Unfortunately, I quickly found out that it wouldn't be quite as simple as I had hoped. After a couple laps around the tree of confusion, a trip to guitar center, a good read through of the manual, google, and a fair amount of forums, I found I was supposed to download the driver. I own a mac, by the way. Well, after 15 or so trips to the download section of behringer.com, I can't find a driver for mac for the life of me. Thus brings me here, somewhat of my last resort before looking into other usb interfaces (God forbid).
Any help would be greatly appreciated.

 

[Milfje]

Hi Dinopresley,

I have the exact same mixer at home, so I might be able to help you out. First of all, I suppose you downloaded the correct driver from the following link? For Windows, I know the important things is to have the Behringer driver and ASIO4ALL installed. The first will make you able to send all audio from your OS to the mixer (and recieve the output of the mixer). The second will allow you to use it in a low latency mode for use in any DAW of your choice (this will work with the Behringer driver too, but ASIO4ALL will enable you to use multiple audio interfaces, which might come in handy). For Mac, I'm not so sure how everything works, but nonetheless you should browse down on the following link to the Mac OS section, you might find what you're looking for there.

behringer.com/EN/Support/U-Control-Downloads.aspx