Astatic 827A Cardioid Miniature Condenser Gooseneck 827A-17 B&H
http://www.google.com/url?sa=t&rct=...DDH2zECI0UylgvSodmUi9Dw&bvm=bv.80185997,d.cGU
Cheapest - ($100) Curves' in the ballpark..
Some AT's
U859QL Cardioid Condenser Quick-Mount Gooseneck Microphone || Audio-Technica US
Roll off with a rise
U857QL Cardioid Condenser Quick-Mount Gooseneck Microphone || Audio-Technica US
'Falter w/ roll off
I'm thinking about.. strapped to an acoustic guitar here. Not live' BTW. Quick easy recording here
w/o being stuck '+/-' a few inches from a mic is the goal.
If they could sound at least pretty decent..? The curves are probably about right- i.e. I know by some other mics four or five inches from the neck, need some roll off to counter proximity effect. A bit of high rise -or not, is ok. Decent tone right off would be a big plus, but I'm also ok with needing some eq along the way, that could be fine.
Mics strapped directly to guitars for sure tend to pick up a lot of low freq crap.
There i'm wondering if the long goose neck might subdue some of that?
http://www.google.com/url?sa=t&rct=...DDH2zECI0UylgvSodmUi9Dw&bvm=bv.80185997,d.cGU
Cheapest - ($100) Curves' in the ballpark..
Some AT's
U859QL Cardioid Condenser Quick-Mount Gooseneck Microphone || Audio-Technica US
Roll off with a rise
U857QL Cardioid Condenser Quick-Mount Gooseneck Microphone || Audio-Technica US
'Falter w/ roll off
I'm thinking about.. strapped to an acoustic guitar here. Not live' BTW. Quick easy recording here
w/o being stuck '+/-' a few inches from a mic is the goal.
If they could sound at least pretty decent..? The curves are probably about right- i.e. I know by some other mics four or five inches from the neck, need some roll off to counter proximity effect. A bit of high rise -or not, is ok. Decent tone right off would be a big plus, but I'm also ok with needing some eq along the way, that could be fine.
Mics strapped directly to guitars for sure tend to pick up a lot of low freq crap.
There i'm wondering if the long goose neck might subdue some of that?