T
toka
New member
Hey!
I have just bought a new PC:
AMD Thunderbird 1,2 Ghz, 266 FSB
512MB SDRAM PC 133
Microstar ATX VIA KT33A Socket A (Motherboard)
IBM Deskstar 75GXP 46,1GB 7200RP IDE
16MB Diamond Viper Graphic card
Audiowerk 2 Souncard
I have some questions about my computer.
1. Can i destroy anything on my moterboard if i connect the small colored (green white etc) cords
that controls Power Switch, Reset Switch, Power LED and HDD Led wrong? Is the colored cords always plus and the white minus?
2. What does Power LED mean?
3. Can anything happen with my computer if i change something in BIOS. can i change it back or?
3. When i start up my computer it started to beep continusly. I found out that i had a old keyboard so i replaced it to a newer one
then it stopped. Why does it start to beep and it does not stop either?
4. I have some questions about the menus in BIOS.
Can anyone explain these:
Halt On (All, But Keyboard)?
Boot Up Numlock Status (On, Off)?
OS Select for DRAM > 64MB (Non OS2, OS2)?
AGP Aperture Size?
AGP 4X Mode?
Led in Suspend?
5. When i change something in my BIOS and save and exit, then my PC does restart but my monitor automatically shuts down. when i power it on again it shuts down automatically. why? i have a old 16Mb graphic card on the AGP slot. is it because that?
Everytime i restart my computer the monitor does so when i exit from bios.
And sometimes it starts to beep when i restart my pc
is it something wrong in Bios or? i have to plug out the power cord from the computer to shut down my PC. i cant just use the power
button on the computer cause it dont work. is it bios or graphic card?
Please can anyone help me with these questions
Toka
I have just bought a new PC:
AMD Thunderbird 1,2 Ghz, 266 FSB
512MB SDRAM PC 133
Microstar ATX VIA KT33A Socket A (Motherboard)
IBM Deskstar 75GXP 46,1GB 7200RP IDE
16MB Diamond Viper Graphic card
Audiowerk 2 Souncard
I have some questions about my computer.
1. Can i destroy anything on my moterboard if i connect the small colored (green white etc) cords
that controls Power Switch, Reset Switch, Power LED and HDD Led wrong? Is the colored cords always plus and the white minus?
2. What does Power LED mean?
3. Can anything happen with my computer if i change something in BIOS. can i change it back or?
3. When i start up my computer it started to beep continusly. I found out that i had a old keyboard so i replaced it to a newer one
then it stopped. Why does it start to beep and it does not stop either?
4. I have some questions about the menus in BIOS.
Can anyone explain these:
Halt On (All, But Keyboard)?
Boot Up Numlock Status (On, Off)?
OS Select for DRAM > 64MB (Non OS2, OS2)?
AGP Aperture Size?
AGP 4X Mode?
Led in Suspend?
5. When i change something in my BIOS and save and exit, then my PC does restart but my monitor automatically shuts down. when i power it on again it shuts down automatically. why? i have a old 16Mb graphic card on the AGP slot. is it because that?
Everytime i restart my computer the monitor does so when i exit from bios.
And sometimes it starts to beep when i restart my pc
is it something wrong in Bios or? i have to plug out the power cord from the computer to shut down my PC. i cant just use the power
button on the computer cause it dont work. is it bios or graphic card?
Please can anyone help me with these questions
Toka