Search results

About the G2V-282P 24v Relay: I have found it, but it says 47/7 on it. What does this mean? I have also found one that is G2V-2-US-24v It is an 8-Pin as well. It isn't sealed.

THANK YOU SO MUCH! You are the best:D I don't think I have a hair left on my head after this fiasco. Believe me, I have cried over it. Exactly as you described it. Yes, The problem follows the Channel 6 Amp Card. I have cleaned and reseated Cards 1-4, but to no avail. I have also thoroughly...

Not much experience. Not much money either, so I wanted to try and find the problem myself. WOW. That was a LOT of really great info. All my questions were answered and more. I felt that maybe the IC's were the problem w/ Ch-6 because they handle power/amplification(right?). Well, thanks for...

Hey there, I finally got my Multi-Meter working and now I am going into my Tape Machine to try and find the culprit of why it isn't working in Sync Mode and why the Channel 6 Card is barely responding to any signal.:confused: So... I have some questions: 1)How do I measure the Output of my...

I just read that fuses will blow because some other part is not functioning properly rather than the fuse itself and the it is preventing a fire or damage to the equipment. So I'm wondering where the problem may lie. There are SO many problems with my machine that it really could be anything. I...

I have tried with the Transport plugged into the Amplifier Unit and not plugged in. Same thing happened. That's what I thought the problem was, I first tried with it unplugged and thought maybe it blew because the circuit wasn't completed.

There are 2 Fuses for the Rec/Play Output. They are both the same type of fuse. One Fuse is fine, but the other keeps blowing when I turn the Transport power on. Any ideas on why this is and how I can fix it? Thanks, Thomas

Thanks again!:)

Thanks for the input:) So, now Channel 9 is working 80% of the time, but Channel 5 is giving me a big headache. That one does not get up to 0VU ever. Also, at some point the Channel 5(Repro and Sync) fell back -3db, so I had to compensate +3db. What do you think this is? A defective Rec/Play...

Thanks so much for the reply.:) I feel that the problem may lie in either the Head Connector Modules or the Transport-Amplifier Sync Head Input, like you mentioned. What exactly needed to be repaired, and how? Thanks ghost! -Thomas

So, I just received my MRL Tape today and I've been working on the machine for most of the day. The Repro Head Alignment/Calibration was relatively simple. But the Sync Head is really making me angry/nervous. Here's the problem: I play a 1khz Tone. Now and then a Meter or 2 will not respond...

Hey there, I don't own a 80-8(But I am looking feverishly for one) anyways, what you say about the "Record-Ready", is absolutely correct. I read some info about the 80-8 on Reel-To-Reel Texas' website(in the vintage ads section) and it says that the lights blink when in "Record-Ready" which is...

Hello I'm new here. My name is Thomas, I am 19 years old, I am building my first home-recording studio with all analog gear. My main unit is a TEAC A-3340S Tapre deck. I also have a TEAC CX-650R Cassette Deck that is badass. The guy I bought it from said that the playback has a lag of about a...