sweetbeats's latest activity
-
sweetbeats replied to the thread TASCAM M-520.Sorry my error on the source options for channels 1 & 2. I don’t understand what you mean by “Just use Channels 1 and/or 2 and assign... -
sweetbeats replied to the thread TASCAM M-520.The MIC | LINE | INST switch is not a routing or assignment control…it is the source select switch. It sets what input jack the channel...
-
sweetbeats replied to the thread Tascam TSR-8 set up (bias...) + Tascam 58 tension arm rollers.What I’m trying to say, but maybe I’m not making myself clear or I’m misunderstanding what you’re saying, is because of your modified...
-
sweetbeats replied to the thread Audio Technica AT-RMX64 Story….Yeah it’s super unfortunate they made the motherboards out of phenolic resin and not glass fiber. Glad it’s working.
-
Yeap I know, I'm into repairs almost 30 years. Just misunderstood thought you said you used F5. 🙄 So, yesterday I removed bottom plate...
-
sweetbeats replied to the thread Audio Technica AT-RMX64 Story….Never ever use a contact cleaner with lubricant on metal-to-metal contacts, either connectors or switches…so I would never use F5 on...
-
sweetbeats replied to the thread Audio Technica AT-RMX64 Story….9V 50mA is 0.45VA. That’s almost identical to the two examples I gave you. Should be fine. I would not bend pins. You reflowed solder...
-
sweetbeats replied to the thread Tascam TSR-8 set up (bias...) + Tascam 58 tension arm rollers.So, if your cal tape is 250nWb/m, but you’re setting up your record side to print hotter relative to 0VU (by reducing the reproduce...
-
So the Fostex has a similar jumper set up? Just patch cord it up for now. Fire it up! I won’t be responding till there’s good news. :D...
-
sweetbeats replied to the thread Audio Technica AT-RMX64 Story….1. The AT-RMX64’s rated power requirement is 65W, so I see no reason why a 100W rated step-down power transformer wouldn’t be fine. If...
-
Wherever you post it I'll give it a read. I really enjoy reading about other people fixing things. I don't check the keyboard forum...
-
sweetbeats replied to the thread TASCAM M-520 w/TASCAM 80-8.So glad you figured it out. This is what makes it hard to sort these things out online when we can’t actually see what you see. So it’s...
-
The means the former owner most likely had the insert jacks hooked to a normalized patch bay which would act as a jumper, then lost the...
-
sweetbeats replied to the thread TASCAM M-520 w/TASCAM 80-8.Start by monitoring at the direct out jack for channel 1 to verify signal is passing through the channel before you try and figure out...
-
sweetbeats replied to the thread TASCAM M-520 w/TASCAM 80-8.Did you read my post #31?
