sweetbeats's latest activity
-
sweetbeats replied to the thread TASCAM M-520 w/TASCAM 80-8.Please refer to my post #31 in your parallel thread for some guidance. But also heed @RFR’s suggestion to first just see if you’ve got... -
sweetbeats replied to the thread Tascam TSR-8 set up (bias...) + Tascam 58 tension arm rollers.The brass is not critical…steel is fine, but I was talking about stainless steel…the one you linked is raw steel if I’m reading it right...
-
Sounds like you just want to do some recording with out dealing with the learning curve. So just use your Fostex and get busy. :D The...
-
Detailed is good. It contributes to the information archive.
-
sweetbeats replied to the thread TASCAM M-520.Thanks, @RFR…that’s much better to get him going. Sometimes I’m too detailed.
-
Hmm, kind of what I was gonna say but yours was much more elaborate in the explanation. May I suggest something simpler? Don't use...
-
sweetbeats replied to the thread TASCAM M-520.You’ve got signal to the PGM 1 buss, but now you have to set the monitor section of the console to listen to it. Okay? You’ve got your...
-
sweetbeats replied to the thread Tascam TSR-8 set up (bias...) + Tascam 58 tension arm rollers.Here is a cross-section i drew up of the washer…it is not to scale. Dimensions are in millimeters: I believe the material is brass...
-
-
sweetbeats replied to the thread Tascam TSR-8 set up (bias...) + Tascam 58 tension arm rollers.Okay that all makes sense. Just follow the procedure in the manual. The 58 manual indicates to use 10kHz. I’m seeing now the manual...
-
sweetbeats replied to the thread Tascam TSR-8 set up (bias...) + Tascam 58 tension arm rollers.Ah okay. Cool. That tape is not the basic 100Hz/1kHz/10kHz tape, but also not as comprehensive as the tape with the full tone ladder...
-
-
Forget about the aux for now. If you’re inputting the guitar into channel one instrument input and are going from the mixer direct out...
-
Learn one channel, then you understand all 20.
-
sweetbeats replied to the thread TASCAM M-520.So here is where we need you to be specific and detailed if you want help. 20 questions can be a fun game, but not here IMO. That’s just...
-
I used the Fostex because I know how to use it and I wanted to at least get music on the tape machine. Then, switch back to the 520 and...
-
sweetbeats replied to the thread Tascam TSR-8 set up (bias...) + Tascam 58 tension arm rollers.Just a couple comments…I don’t know what tape you are using, or what your plans are, but if you record hotter like that using a “+6”...
-
