Recent content by altitude909

Midiox. It will merge, route, split, fliter, transpose, whatever you want. Learn it, love it, live it. http://www.midiox.com/zip/midioxse.exe

Email Dave Smith (just go to the DSI site and grab the general email), I'd be HIGHLY surprised if he wouldn't help you out or at least give you something cool to go on

So here is my no-solder, plug and play midi kit. This consists of midi in and out on a surface mount PCB. Instead of midi jack, I am using 3.5mm TRS to DIN5 cables (included 2x 6ft Rean/Neutrik metal connectors) since drilling 2 small holes anywhere is a lot easier that 2 huge ones. You can...

Not to pee in your cornflakes or anything, but you do realize the last post in this thread was made 7 years ago..

sounds like it is sending running status, it's just a signal saying "something is connected"

Id say a sampler would be the way to go, there are a bunch of free ones out there and then just find a decent set of bass guitar samples..

P-140 is midi only, thats why I asked why he is using a Yamaha USB midi driver.

What is the "Yamaha USB-Midi Driver"? With a generic/whichever midi to USB cable/interface there will be no feedback is something is connected via midi or not, it should just work in your DAW/Program of choice.

You need to record the audio from the synth via audio inputs, not midi

Makes a nice door stop. Beyond that, not too much use.

Any mixer that will take a line level input is the same thing. The key thing is a mute button i believe

+1 for roll your own. A decent iron can be bought cheap (fixed temp, just plug it in) and you can make them as u need them. I recommend Redco audio (Redco Audio - Custom Audio Cables - Recording Studio Supplies - Custom A/V Panels - Redco Audio Home Page) or Markertek as mentioned. The...

A program change is getting recorded with the midi track or being set by the midi track properties. I dont use PT so I cant help beyond that. Check the midi events or look at the midi track and see if it assigned there..

Dont expect much from a single core P4. That chip is so old, running software that's made for modern processors will result in little more than frustration. Find some software that was made 6 years ago when this thing was actually considered fast and stick with that.

Almost.. R3 midi out-> Motu Midi in Motu Midi Out -> R3 Midi in R3 midi through -> Drum Module You need to set the "local off" on the R3 otherwise you will get a midi echo. Now all your midi will be routed through DP. Set your R3 to receive on one midi channel and the drum module to...