Can you clarify ware you are setting your levels?The mixer seems to be working. Phantom power light works, but I am not getting levels. I have it plugged into a XLR and then into the computer. When I try to set the clipping levels, the lights do not move. Any ideas?
The mixer seems to be working. Phantom power light works, but I am not getting levels.
have it plugged into a XLR and then into the computer.
When I try to set the clipping levels, the lights do not move. Any ideas?
Off hand looking at the service manual for the mixer, part of the internal power supply section in the mixer may have a problem. The light for the +48vdc phantom power is a different circuit than the +/- 15vdc power for the power light and the meters. I would believe the +/- 15vdc power section has a problem since the power light doesn't come on.Also, thank you for the many responses!
I am plugging in an XLR microphone Apex 435 condenser mic. When I turn on the Phantom Power button, I get it lighting up, so power is getting through ( I had to buy a replacement Behringer UB1002 Xeynx power adapter).
Unfortunately, I have noticed that I am not getting any power lights or level lights for the MAIN SECTION.
The mixer I have looks like this (I gave the wrong version of the mixer in the description, sorry about that - it is the UB1002 Xeynx):
I am wondering if there is something wrong with the actual mixer because of this. Power is flowing through it because of the Phantom power working, but the POWER button and LEVELS (when using the mic, screaming into it ) do not light up.
Also, thank you for the many responses!
I am plugging in an XLR microphone Apex 435 condenser mic. When I turn on the Phantom Power button, I get it lighting up, so power is getting through ( I had to buy a replacement Behringer UB1002 Xeynx power adapter).
Unfortunately, I have noticed that I am not getting any power lights or level lights for the MAIN SECTION.
The mixer I have looks like this (I gave the wrong version of the mixer in the description, sorry about that - it is the UB1002 Xeynx):
View attachment 104302
I am wondering if there is something wrong with the actual mixer because of this. Power is flowing through it because of the Phantom power working, but the POWER button and LEVELS (when using the mic, screaming into it ) do not light up.
Sweetwater sells the OEM power supply that does have the MXLU5 number.sounds like the power supply is broke or is not connected properly but
worst case the circuits inside are fried - just why did you need to buy a new power supply anyway ???
best case the power light is not working and you have some setting wrong
the manual says you need an mxlu5 adapter but amazon does say the psu3 works with that unit
how did you plug it into the computer? the problem may be in the computer end
did this thing ever work right for you ?
what changed ??
Sweetwater sells the OEM power supply that does have the MXLU5 number.
Behringer PSU5-UL | Sweetwater
......but it's not the PSU3-UL??????
Found a pic of the power supply box that shows UB1002 and PSU3-UL, so those should match up OK
netrate....
same question as mr average..... did the mixer ever work and did you buy a new power supply because it quit working?
Is the replacement a real Behringer one or a Chinese knockoff?
Make sure the power connector into the mixer is pushed all the way in.
Unless you have some experience repairing electronics stuff, probably you wouldn't be able to fix it yourself.
Smaller mixer needs less amps and the pic of the Behringer PSU3-UL box shows the mixer the OP is using. You can always use a higher capacity power supply which is what the manual conveyed.the 5 puts out twice the amps as the 3
could that be the problem ?
with the 48v light on and main one off i tend to suspect other issues
now there were TWO connectors shown on the amazon PS unit
do you need to use both of them?
the behringer docs dont even have any pictures of the i/o or power connections