CoolCat
Well-known member
well... the LA610SE, LA610 non Mkii … is fully working and the signal to the DAW is a nice thick healthy full tone wave now.
that's the good news.
the bad news is my LDC and my totally back-slid room into noise, is a horrible match for LDC's (as in all the noises we cant hear with our ears are magnified 1000times with the compressor and LDC = dynamic needed here)
Test 2-
the Bass was plugged in, the large knobs are very fast & easy to use.. large knob on the LA610 are just cool in a vibe way, the comp works as it should, its a real tube design and this is what it sounds like. ..but...... again, hmmm...my single coil noisy antenna Squier Bass is waay too noisy.
I did some tracks with comp and no comp etc.... its what it is. The LA610 did its thing, unfortunately my noisy single coils did their thing too.
but then wtf...I plugged the bass into my interface instrument in and pulled up Gearbox PodFarm Suite.... 3seconds
click = tuner...tuned 10seconds
click = Hum reducer....select "Learn" and Hum is gone...5 seconds
click= BX Lux Ampeg sim and added the LA2A a bit.. 30seconds ..sounded nice and wet..
click on DAW and Recorded not only the fx track but could also do a clean dry track in parrell due to the UX8/podfarm software without moving a cable.
Selected Reaper T1 - dry and T2 with Gearbox Amp sim click....RECORD
the Line 6 Gearbox ITB was a nice clean silent great tone Bass track. imo
which tool would I use for a silent Bass track? the latter.
to be continued.
that's the good news.
the bad news is my LDC and my totally back-slid room into noise, is a horrible match for LDC's (as in all the noises we cant hear with our ears are magnified 1000times with the compressor and LDC = dynamic needed here)
Test 2-
the Bass was plugged in, the large knobs are very fast & easy to use.. large knob on the LA610 are just cool in a vibe way, the comp works as it should, its a real tube design and this is what it sounds like. ..but...... again, hmmm...my single coil noisy antenna Squier Bass is waay too noisy.
I did some tracks with comp and no comp etc.... its what it is. The LA610 did its thing, unfortunately my noisy single coils did their thing too.
but then wtf...I plugged the bass into my interface instrument in and pulled up Gearbox PodFarm Suite.... 3seconds
click = tuner...tuned 10seconds
click = Hum reducer....select "Learn" and Hum is gone...5 seconds
click= BX Lux Ampeg sim and added the LA2A a bit.. 30seconds ..sounded nice and wet..
click on DAW and Recorded not only the fx track but could also do a clean dry track in parrell due to the UX8/podfarm software without moving a cable.
Selected Reaper T1 - dry and T2 with Gearbox Amp sim click....RECORD
the Line 6 Gearbox ITB was a nice clean silent great tone Bass track. imo
which tool would I use for a silent Bass track? the latter.
to be continued.