ENter BIOS and DISABLE HYPER THREADING?

hey Dr!
thanks for that,,
i shall have a wee look and see if i can get myself any the wiser by doing that!
im not even a computer APPRENTICE Wiz ! :D

all i wanna do is get it installed,,and then spend months being pissed off and puzzled by it,,,
then eventually getting enough know how to record some stuff !;-!)
man,,its absolutely tedious trying to get to that stage though!

SURELY,,,they could make it a plug n play kinda thing!
 
hey Dr
thanks for that info,,,,,,

well i managed to click disable on any networkin Cards apart from 1394 one,,,,
but i cant find how to loook into the video display card by going into the
control panel!
 
Monsterpop said:
ah well,,i wont if ye dont want me to( mate :D )
its just a Scottish thing,,what can i tell ye? ;-)
we are a friendly race !
aah.,,.your thinkin of Australians,,,fair enough!;-)

its not just kangaroos ye know,,,haggis do it too!!!
Click to expand...

It's all good, aye? Did I say that right?

Maybe if you come over to the other side of the ocean, we'll be mates? Um...that doesn't sound right does it?

Best luck!
 
aye,,thatl do!;-) i was just over there about six weeks ago in fact.
but im back in sunny(NOT) GLasgow now.

i think i may well be dead by the time i get this MBOX fecker on the go anyway!
and my bottle of port is even starting to get pretty low,,,grrrrrr!

so much for starting to use it tonite then! :mad:
 
right click on your "desktop" click "properties" click the "settings" tab, then click the "advanced" button, then scroll through all the tabs until you see what you are looking for.
 
Creamyapples1 said:
right click on your "desktop" click "properties" click the "settings" tab, then click the "advanced" button, then scroll through all the tabs until you see what you are looking for.
Click to expand...

hey mate

well i just did that,,but theres no tab for video display card,,,
so i think ive done as much as i can according to the manual now.
do ye think its time i just went for it and started trying to load the machine and software on?
:confused:
 
If you did as I suggested, that's the only thing that could have came up. If something other than video card information came up, you didn't do it right.
 
I'd give it a go Monsterpop... from the sounds of it, that is a tweak to optimize performance, but not absolutely necessary... You can get to your video card settings the way Creamyapples suggested, but for now you probably just want to get using your software - you can always go back later and change that if you're having troubles or if you get a hold of a friend who can give you a hand.
Load up Pro Tools and give it a shot! :)
 
hey mate

well i did what you said to do,,and theres no tab regarding video,,,
so if its there,,i dunno what im lookin for;-)
i tried to upload a screenshot so you see what i see,,
but the bugger is to large,
and i of course dunno how to make it the correct size;-)
 
Dr Biscuits said:
I'd give it a go Monsterpop... from the sounds of it, that is a tweak to optimize performance, but not absolutely necessary... You can get to your video card settings the way Creamyapples suggested, but for now you probably just want to get using your software - you can always go back later and change that if you're having troubles or if you get a hold of a friend who can give you a hand.
Load up Pro Tools and give it a shot! :)
Click to expand...


hey Doc;-)

i apologize for bein so shite at even the most basic things mate,,,
im just new to the whole concept of recording using the computer ye know?
really have just come straight from the wee red box Fostex MR8,,
to all this pc malarky!
i DO really appreciate everyones time to try and help me though,,
so i thank you all for that. Now,,,its "manual time" again eh?
theres umpteen CDs to get loaded up by the looks of it,,
and i have NO idea where to start;-)
thanks mate;-)
 
Different brands use different buttons. Try Delete, F10, or Tab (one at a time, of course). If it gets past the black screen with white text, hit the reset button and try a different one.
 
Well, goodluck man!
For now, you can just install the ProTools software... get that up and running and then worry about all the other stuff that comes with it ;)
 
noodles2k5 said:
Different brands use different buttons. Try Delete, F10, or Tab (one at a time, of course). If it gets past the black screen with white text, hit the reset button and try a different one.
Click to expand...

hey Noodles
thanks for posting mate. i EVENTUALLY got past that part,,,by using Delete key. so now its the slog to get it all workin

cheers;-)
 
Dr Biscuits said:
Well, goodluck man!
For now, you can just install the ProTools software... get that up and running and then worry about all the other stuff that comes with it ;)
Click to expand...

thanks Doc

i shall consult the very demanding manual and see what happens;-)
ta for all the help guys;-)
i appreciate it

and im not there yet,,,so dont run out on me;-)
hehe
cheers :cool:
 
Monsterpop said:
and my bottle of port is even starting to get pretty low,,,grrrrrr!
Click to expand...


Port!!!???


what's up with single malt... you surprise me ;)


reading through this monster kind of puts me off from ever bothering with firewire :eek:
 
HEY MATE
WELL THE SIMPLE AND HONEST REASON IS THAT,,,
ITS BETWEEN pORT AND gOLDWASSER,,
,AND I CANT REALLY FACE THE gOLD STUFF TONIGHT;-)
And believe it or not,,im STILL sitting here loading up cd's and being harrassed by non existant serial and registration numbers!
i have NO idea what idoing,or even what all of these things are for!
Jeeez,,,i dunno why i bought the bloody thing now that i think about it !;-(

cheers
:eek:
Synkrotron said:
Port!!!???


what's up with single malt... you surprise me ;)


reading through this monster kind of puts me off from ever bothering with firewire :eek:
Click to expand...
 
Monsterpop said:
aye well,,thats would be alright if i knew how to do the things to my pc that the feckin manual insists upon sir! :(

but i dont,,,,, stupid bloody over complicated bassa that it is! :confused:
Click to expand...


Hey "mate", I hope you're not to "gutted" to find out home recording is a bit advanced for "NEDS"

You're obviously having problems with your M-Box...you've read that disabling the HT in your BIOS may possibly cure your problem, but....you haven't even bothered to mention what the problem is.....now you're looking for more stuff in the M-Box manual to "FIX" in some sort of wild goose chase.

Try stating exactly what the problem is you're having, what equipment you are using, and what configuration you have the equipment in. That should give anyone here with half a brain the foundation to research your problem for you and convert it to "NED" terms for you to try and understand.


If that doesn't work just post up where you live and I'll come round and rob your gear....chances are I'll be robbing my gear back anyway.

Good luck
 
whats with all this " " crap,, and NEDS patter?
and what exactly is your problem?
people have been very nice here,so you can leave the others to help thanks

away n gies peace
 
Monsterpop said:
whats with all this " " crap,, and NEDS patter?
and what exactly is your problem?
people have been very nice here,so you can leave the others to help thanks

away n gies peace
Click to expand...

If you cannae take a joke you can away an

peace off ;)
 
aye,,,cos it looks very like a joke the way you typed all that eh?
if its a joke,,fine. i dont get it.

i also DESPISE neds and anything to do with them. so its even less funny

bye bye
 
You must log in or register to reply here.
Back
Top