WTB: cheap adat

  • Thread starter Thread starter notbradsohner
  • Start date Start date
N

notbradsohner

Compression Addict
I need another ADAT around here. Anything from alesis and I will go to $200.


And dont let Dragon hijack this thread, I know youve been lookin for one!!!! :p
 
email sent


anyone else? I could use more than one
 
Hey there,

I tried emailing you back, but my emails are bouncing back.

I'm the guy with the XT-20 that works perfectly except for the hour thing being screwed up, for $100 plus $20 shipping. The best I can do is $100 plus $10 shipping if paying via money order, or $100 plus $15 shipping through Paypal.

My email is jimmymac@new.rr.com. I don't know why my emails are all bouncing back from you. You can PM me if you like.

Thanks,

Jay Lison
 
Tubejay, I sent you an email, see if you can reply thru that.
 
got it, sent you one back
 
Last edited:
Sorry, just got your email. I will know on monday if I can do the LX20. If you do need more, I can do an XT20, an LX 20 and a BRC remote for $600. I also have a blackface that needs a power supply. I can get the price on the repair (my repair guy is just 4 blocks away). If you want to pay for the repair and shipping (assuming you buy the others) you can have that one as a bonus. My bet is about $675 + shipping for an XT20, an LX20, a Blackface, and a BRC (which constantly sell alone for $300-$400).
 
xstatic. I dont need THAT many adats. hehe. Actually, I think im all set. I found one from a neighbor and another person on the board. Thanks tho......
 
Not a problem. I am bummed a bit though because ADAT's are nearly impossible to sell. I really only want to sell them to someone who is already invested or commited to ADAT's. For new users, there are much better much more powerful ways to go. Usually cheaper too:( I just want to find the RIGHT home for them. Not just ANY home.
 
I am just expanding to my second one, but I found on for $100, and couldnt resist. They are great for beginners, which is how I started out, and I just dont have the $ to jump to a 24 channel hard disk unit. Ill let you know if I need any more. (Ive got one that is just looking for reason to die)
 
I just bought an XT20 to go with my XT16. I could use another XT20 cheap, anybody have one? :eek:
 
Looking for a xt20 and a brc. I already have one and would like to expand a little. Let me know if you can help.

Thanks,

Matt
 
I can do an XT20 and a BRC for $500. $600 if you want to take my LX20 with it and a free old black face that needs a power supply repair:) PLus shipping of course.
 
Those things are gonna go for dirt cheap these days.
You can get an HD24 and a BRC for under $1300 why would anyone pay more than $200 for a great ADAT?

Thank heaven for ebay!
 
how many hours on the xt20 and what condition are they in (any pics). I don't use them alot (less than 100 hours on the one I have) but I want a good one to go with the one I already have. Do you have power cables, elco, sync ect. that you could include. Also, do you have a stand for the BRC. Can you also either give me a weight or shipping estimate to 62959.

Sorry for so many ?'s but just need to know.

Thanks,

Matt
 
Did you ever find an additional ADAT? If so, do you know of anyone that has another one (preferably an XT-20) and a BRC with a stand?

Just thought I would ask. I am brand new to this site and am looking to expand my single xt20 to two.

Thanks,

Matt
 
I might have an xt-20 I might sell for around 250.
 
My XT20 has probably 1500 hours on it, but was just cleaned 2 weeks ago. I lent it to my tech who does the cleaning and alignment for a session and he did all the maintenance on it when he finished. I have a couple ELCO cables, but I cut the tips off ofthem (i soldered them to a patchbay and have since cut it out). I do have a roll stand for the BRC as well. I will throw that in too, but it will raise the shipping cost. I will see if I can get a shipping estimate. The BRC stand ay be a pain to ship because I don't think it completely comes apart. My LX20 is in the same condition as the XT20, with a few less hours on it, but the same 300 hour maintenance schedule throughout it's lifetime. I think the blackface has about 1000 hours. I can't tell until the power supply is fixed:)
 
jake-owa said:
Those things are gonna go for dirt cheap these days.
You can get an HD24 and a BRC for under $1300 why would anyone pay more than $200 for a great ADAT?

Thank heaven for ebay!
Click to expand...

$200 is what I am asking for my XT20. The stupid BRC is worth more than the ADAT itself nowadays:D $600 is waht I wanted for the BRC, XT20, LX20, and a blackface. As well as 2 old ELCO to bair wire cables, and a BRC stand. I agree that ADAT's aren't worth much nowadays. I really am looking to sell it to someone that is vested in ADAT's and doesn't want to change. I would never reccomend them to a new user. A Hard disc recorder is much more efficient and cost effective in the end. However, what I am selling compared to what I am asking for it is a pretty fair deal. At least for the buyer. Not for the person that had to spend $2500 per machine when they were new.
 
You must log in or register to reply here.
Back
Top