mshilarious
Banned
Starved 12AU7 version
same layout, just a revised copper layer:
same layout, just a revised copper layer:
mshilarious
Banned
Now for some fun pictures! I've started to spray my pedal, which I have dubbed the "Pinkie Pie". 
Hopefully Hasbro won't sue 
Still need to spray the clearcoats, but it is looking much better than it started!
Pinkie Pie will have the addition of a bass rolloff pot, mainly since I have an existing hole for a third pot, but it's an easy circuit mod with the existing PCB layout. More on that later.
For now, just enjoy these pics
Before:
Hopefully Hasbro won't sue Still need to spray the clearcoats, but it is looking much better than it started!
Pinkie Pie will have the addition of a bass rolloff pot, mainly since I have an existing hole for a third pot, but it's an easy circuit mod with the existing PCB layout. More on that later.
For now, just enjoy these pics
Before:
mshilarious
Banned
After:
mshilarious
Banned
Here's tonight's picture, a stuffed but unsoldered board!
I will have to make a revision to the PCBs above, I didn't leave enough room for C2. Or you could switch to a 0.01uF poly film rather than the 0.1uF poly film box I specified. That's what I did. The 0.01uF cap is still big enough for a guitar pedal. Use 0.022 or 0.033 uF if you are concerned.
I have to solder the tube to the board here, because my box is too small to accomodate a socket
I will have to make a revision to the PCBs above, I didn't leave enough room for C2. Or you could switch to a 0.01uF poly film rather than the 0.1uF poly film box I specified. That's what I did. The 0.01uF cap is still big enough for a guitar pedal. Use 0.022 or 0.033 uF if you are concerned.
I have to solder the tube to the board here, because my box is too small to accomodate a socket
Similar threads
- LazerBeakShiek
- Guitars and Basses
- gene12586
- Newbies
- roowen
- TASCAM User Forum
- weakenduser
- User Contributions