
mark4man
MoonMix Studios
OK...
Part I) I'm now getting more practical at making gear considerations (many will say: "bout time, 4man")...in that, I understand that the studio environment is the constant (all things else being variables.)
So, here is where I am.
My DAW is all native (SONAR & WaveLab on a Wintel PC), with good prosumer quality AI/conversion (Layla 24/96.) Everything I do is basically done in-the-box (except for good Lexicon outboard FX); & I am awaiting the delivery of the UAD-1 DSP system to put a nice EQ/compression touch on key tracks; & some subtle peak limiting on the mix buss. But my project studio "room" does not sound like Studio B at Ocean Way in West Hollywood...so there is no natural ambience to capture.
With this...logic tells me to capture my vocals via solid-state & make 'em sound pretty in the digital domain. But at the same time, I wanted at least a little depth & sustain going in through the front end.
Went & picked up a Groove Tubes GT55 LDC & a dbx 386 tube pre. The GT55 is a bit dark; & their resonator disc capsule technology has my voice too easily overmodulating the signal. The 386 exacerbates the darkness 'cause it's not as clear & crisp on the highs as I'd expected.
So I did a fairly good amount of research in this area, which eventually began to move toward the lush California studio vocal sound of the 60's (which turns out to be what I'm really after.) Tell me if you think this is true or not, but the consensus seems to be that the highest sonic quality (& most sought after) vocal signal chain from that classic period was the old AKG C12 or C14 LDC piped through a Putnam designed Universal Audio 610 console.
So this is now an easy choice, right?
Since the modern day AKG TLII LDC is a faithful reproduction of the earlier classic; & since the UA 2-610 mic pre is the same design (+ a better power supply) as their vintage piece...these two in combination should be the cat's meow, correct?
So...has anyone had any experience with either of these, (hopefully in combination)?
How about individually, with other mic's or pre's?
I would really be appreciative in hearing opinions on this gear (& on achieving this type of sound, in general.)
Thanks loads,
mark4man
BTW - Part II)
(& please don't let this detract from Part I):
Since I need to move away from too fat a sound in mic selection (& since the AKG is a hefty piece of change)...are there other less expensive LDC mic’s that are more crisp in the mids & highs, like maybe from the AT 40 series or Rode NT1000.
And since I also need to move toward a pre that will be rich & sweet (& since I'm not "rich")...are there other less expensive pre's capable of near the same quality.
Or do I need to move in a totally different direction on this (based on the above studio specs)?
(man, I hope not.)
Part I) I'm now getting more practical at making gear considerations (many will say: "bout time, 4man")...in that, I understand that the studio environment is the constant (all things else being variables.)
So, here is where I am.
My DAW is all native (SONAR & WaveLab on a Wintel PC), with good prosumer quality AI/conversion (Layla 24/96.) Everything I do is basically done in-the-box (except for good Lexicon outboard FX); & I am awaiting the delivery of the UAD-1 DSP system to put a nice EQ/compression touch on key tracks; & some subtle peak limiting on the mix buss. But my project studio "room" does not sound like Studio B at Ocean Way in West Hollywood...so there is no natural ambience to capture.
With this...logic tells me to capture my vocals via solid-state & make 'em sound pretty in the digital domain. But at the same time, I wanted at least a little depth & sustain going in through the front end.
Went & picked up a Groove Tubes GT55 LDC & a dbx 386 tube pre. The GT55 is a bit dark; & their resonator disc capsule technology has my voice too easily overmodulating the signal. The 386 exacerbates the darkness 'cause it's not as clear & crisp on the highs as I'd expected.
So I did a fairly good amount of research in this area, which eventually began to move toward the lush California studio vocal sound of the 60's (which turns out to be what I'm really after.) Tell me if you think this is true or not, but the consensus seems to be that the highest sonic quality (& most sought after) vocal signal chain from that classic period was the old AKG C12 or C14 LDC piped through a Putnam designed Universal Audio 610 console.
So this is now an easy choice, right?
Since the modern day AKG TLII LDC is a faithful reproduction of the earlier classic; & since the UA 2-610 mic pre is the same design (+ a better power supply) as their vintage piece...these two in combination should be the cat's meow, correct?
So...has anyone had any experience with either of these, (hopefully in combination)?
How about individually, with other mic's or pre's?
I would really be appreciative in hearing opinions on this gear (& on achieving this type of sound, in general.)
Thanks loads,
mark4man
BTW - Part II)
(& please don't let this detract from Part I):
Since I need to move away from too fat a sound in mic selection (& since the AKG is a hefty piece of change)...are there other less expensive LDC mic’s that are more crisp in the mids & highs, like maybe from the AT 40 series or Rode NT1000.
And since I also need to move toward a pre that will be rich & sweet (& since I'm not "rich")...are there other less expensive pre's capable of near the same quality.
Or do I need to move in a totally different direction on this (based on the above studio specs)?
(man, I hope not.)