Teac/Tascam Mixer Pushbuttons

[BeatleFred]

Just wanted to ask a question on the pushbuttons that are on various mixers, the reason being I want to check
the VU meters on several of my MB-20 meter bridges, and there was a video on You Tube made a while ago
whereby the person had applied DeOxit within the buttons to clean the static-ky noise after he did the calibration.

But it did not show how the buttons were taken off and reattached. I have the service manual for the MB-20 and the
test equipment, the procedure looks straightforward to align all four meters to 0 VU.

The same pushbuttons are also on the 2A mixer, M-30, Model 5 and so forth. I just wanted to ask, because I dont want
to assume they can just be pulled off by hand and simply push them back in and they will reattach automatically.

 

[BeatleFred]

I dont see a delete button for the previous post, realized afterward, the buttons stay on, and the front panel comes off if want to spray inside with DeOxit.

 

[RFR]

I dont see a delete button for the previous post, realized afterward, the buttons stay on, and the front panel comes off if want to spray inside with DeOxit.

It was changed. Now you have only an hour to edit or delete a post.


But good you figured out how to clean the switches out.