
Drummerbones
New member
I just purchases this guitar yesterday, and all I can say is WOW. I love it...however, I'm condisering a few alteration. I wanted a guitar with the FLoyd Rose to give me more options on set up and tuning etc., though I will never use the trem. I don't do dive bombs or any of that 80's lead guitar stuff. The two things I would like to do is:
1. Make the bridge fixed instead of floating.
2. Go from .09 strings to .10's.
So here's my questions: Do I do the "smart and safe" thing and take it to a Luthier or guitar tech?
Assuming I know what I'm talking about, if I go to .10's, it will alter the amount of tension on the bridge and will thus need adjusting. The only reason I want to change the string size is because I'm used to playing acoustic and I tend to play with a heavier hand...which causes the light gauge strings to go sharp, especially around the 1st 3 frets or so. I wouldn't think this would really affect the action or the intonation (this is where the "assume" part comes in). Intonation I'm more than comfortable and knowledgable to adjust, just don't know about the bridge on a FLoyd Rose.
As for making the bridge fixed, it seems to be a very common practice that I could perform without damaging or making any permanent changes to my guitar. See this link:
http://www.diyguitarist.com/Guitars/FR-FixedBridge.htm
So what do you all recommend? Is fixing the bridge as easy as it appears, and can I adjust the bridge tension myself when going to .10's? Or is the fact that I'm questioning my ability to do this a dead give-away that I should have a "professional" do it?
Thanks in advance for your input.
1. Make the bridge fixed instead of floating.
2. Go from .09 strings to .10's.
So here's my questions: Do I do the "smart and safe" thing and take it to a Luthier or guitar tech?
Assuming I know what I'm talking about, if I go to .10's, it will alter the amount of tension on the bridge and will thus need adjusting. The only reason I want to change the string size is because I'm used to playing acoustic and I tend to play with a heavier hand...which causes the light gauge strings to go sharp, especially around the 1st 3 frets or so. I wouldn't think this would really affect the action or the intonation (this is where the "assume" part comes in). Intonation I'm more than comfortable and knowledgable to adjust, just don't know about the bridge on a FLoyd Rose.
As for making the bridge fixed, it seems to be a very common practice that I could perform without damaging or making any permanent changes to my guitar. See this link:
http://www.diyguitarist.com/Guitars/FR-FixedBridge.htm
So what do you all recommend? Is fixing the bridge as easy as it appears, and can I adjust the bridge tension myself when going to .10's? Or is the fact that I'm questioning my ability to do this a dead give-away that I should have a "professional" do it?
Thanks in advance for your input.