V
volition
New member
i know this is an old topic, and i'm sorry. i've read all the old threads and i think i understand it for the most part, but i wanted to ask anyways
my band is about ready to buy a new pa. what we've decided on so far is a behringer SL2442FX-PRO mixer, 2 peavey PV15s (the ones with 2 15" speakers), a behringer 2500 power amp, and a behringer 2600 compressor.
the speakers are rated at 500W program and 1000W peak at 4 ohms, and the amp will run 600W at 4 ohms or 2400W for 4 ohms bridged. i really don't understand the parallel/series thing. i was just going to plug the left and right main outs of the mixer into the 2 channels on the amp and one speaker into each output. please let me know if this would work, or if there is a better way i don't know about. also let me know if there are any other problems with this setup.
thanks for your help.
my band is about ready to buy a new pa. what we've decided on so far is a behringer SL2442FX-PRO mixer, 2 peavey PV15s (the ones with 2 15" speakers), a behringer 2500 power amp, and a behringer 2600 compressor.
the speakers are rated at 500W program and 1000W peak at 4 ohms, and the amp will run 600W at 4 ohms or 2400W for 4 ohms bridged. i really don't understand the parallel/series thing. i was just going to plug the left and right main outs of the mixer into the 2 channels on the amp and one speaker into each output. please let me know if this would work, or if there is a better way i don't know about. also let me know if there are any other problems with this setup.
thanks for your help.
