Omni Studio , Cant get mic output?

  • Thread starter Thread starter Shredboy
  • Start date Start date
S

Shredboy

New member
I just recently purchased an Omni Studio / delta 66 from m-audio. I am very new to PC audio and wanted to start some what basic. I am having no problem getting sound from my cpu .. but if I plug a mic in the xlr input 1 on my omni I/o I see the signal but am not getting any sound output from the cpu at all. I have the phantom power on etc, but still nothing ....Any advice would be greatly appreciated.
 
In your recording s/w you need to select M-Audio Delta 66 1/2 (or3/4) as your outputs.

Then in the Delta control panel, select 'Moniter Mixer' on the Patchbay/Router tab, and on the Monitor Mixer tab you need to adjust the Wav out levels of the outputs you selected in the s/w. Make sure the Wav outs aren't muted
 
Thanks for the help guys, another question though.. should i be able to hear myself talk or sing through the mic say if im not using a recording software at the moment? Like just straight through the cpu?
 
It must be a setting im missing in cubase sx 2.0, any suggestion where to change a setting maybe to get sound?
 
So you're saying if you playback something in cubase you can't hear it, but you can play an mp3 OK?
 
Shredboy said:
Thanks for the help guys, another question though.. should i be able to hear myself talk or sing through the mic say if im not using a recording software at the moment? Like just straight through the cpu?
Click to expand...

Yes If you have Monitor mixer selected.
 
Shredboy said:
It must be a setting im missing in cubase sx 2.0, any suggestion where to change a setting maybe to get sound?
Click to expand...

If this is the pci version, there is a an input on the rear "Stereo Aux in 1" Make sure the lil button next to it is not pressed in when you trying to use the xlr ins 1 and/or 2. This button switches the between inputs 1/2 & stereo aux 1
 
Well holy heck !!! Hi_D_Ho_Man, you just made my night..... that was what was wrong !! Thanks a million. Although im still not getting any playback atm with cubase sx 2.0, however I can sleep knowing everything works as of right now.. I just need to fiddle with some settings in cubase I guess. Do I need to switch back from monitor mixer again to hear sound recorded from cubase? sort of lost again...

however thanks a ton guys
 
Last edited:
No u can leave it in mon. mixer mode. It sounds like u need to setup your outputs in 'VST Connections'. The guys on the Cubase forum here will prolly be best to ask, I'm not terribly familiar with SX 2
 
You must log in or register to reply here.
Back
Top