A
amath_uk
New member
Sorry if this info is available, I searched but could not find.
I have connected an external Digitec RP7 unit to the TASCAM DP-01 per connections given in the manual, but I can only hear the guitar without any external effects. What else would I need to do in order to activate the external processor?
Does it work during recording only ?
Connections are as follows:
Connected DP-01 rear panel SEND to mono input of the processor
Connected the stereo outputs of the processor to the 2 RETURN jacks of the DP-01
Appreciate any advise on this.
Thanks,
Matt
I have connected an external Digitec RP7 unit to the TASCAM DP-01 per connections given in the manual, but I can only hear the guitar without any external effects. What else would I need to do in order to activate the external processor?
Does it work during recording only ?
Connections are as follows:
Connected DP-01 rear panel SEND to mono input of the processor
Connected the stereo outputs of the processor to the 2 RETURN jacks of the DP-01
Appreciate any advise on this.
Thanks,
Matt