JustGeorge
New member
Hello,
1. I've got a problem.. Recently I've bought this mic Novox nc-1:
http://topguitar.pl/wp-content/uploads/2014/01/Novox-NC-1.jpg
I''ve been using it with a plastic bucket on my desk, so.. it wasn't an ideal setup.
But today I received my microphone arm and.. I can't really mount my mic to it. And to make everithing worse I even broke one part!
2.Similar to this one:
http://www.bhphotovideo.com/images/...L_MT001_Universal_Microphone_Mount_423760.jpg
The part that I broke came with the mic and you actually screw it into the microphone. (the "funnely" part is threaded and the mic goes into it.)
(I broke this: http://puu.sh/pHDkQ/b89ec75fea.jpg)
3.The entire mic arm (Renkforce AD-20) looks like this:
http://image.ceneo.pl/data/article_picture/0f/d3/a9f2-4ca9-4675-8307-13be83713003_picture.jpg
4.And with the mic arm I received this:
http://www.bhphotovideo.com/images/images500x500/Shure_A25DM_A25D_Mic_Stand_Adapter_396497.jpg
(It's not the same, but pretty similar)
The mic has a 21mm male thread - here: http://puu.sh/pHDq6/288594ac5d.jpg
The mic arm has a 9mm male thread - here: http://puu.sh/pHDqw/d43cca89c2.jpg
So thought of something like this, but female to female:
http://www.ebay.co.uk/itm/1-2-x1-4-...EAD-304-STAINLESS-STEEL-FITTING-/320903892714
Does anyone have any idea on how can I mount the mic to the arm? Or where can I buy a thread reducer that goes 21mm female to 9mm female?
Thanks in advance and really looking forward for your suggestions.
1. I've got a problem.. Recently I've bought this mic Novox nc-1:
http://topguitar.pl/wp-content/uploads/2014/01/Novox-NC-1.jpg
I''ve been using it with a plastic bucket on my desk, so.. it wasn't an ideal setup.
But today I received my microphone arm and.. I can't really mount my mic to it. And to make everithing worse I even broke one part!
2.Similar to this one:
http://www.bhphotovideo.com/images/...L_MT001_Universal_Microphone_Mount_423760.jpg
The part that I broke came with the mic and you actually screw it into the microphone. (the "funnely" part is threaded and the mic goes into it.)
(I broke this: http://puu.sh/pHDkQ/b89ec75fea.jpg)
3.The entire mic arm (Renkforce AD-20) looks like this:
http://image.ceneo.pl/data/article_picture/0f/d3/a9f2-4ca9-4675-8307-13be83713003_picture.jpg
4.And with the mic arm I received this:
http://www.bhphotovideo.com/images/images500x500/Shure_A25DM_A25D_Mic_Stand_Adapter_396497.jpg
(It's not the same, but pretty similar)
The mic has a 21mm male thread - here: http://puu.sh/pHDq6/288594ac5d.jpg
The mic arm has a 9mm male thread - here: http://puu.sh/pHDqw/d43cca89c2.jpg
So thought of something like this, but female to female:
http://www.ebay.co.uk/itm/1-2-x1-4-...EAD-304-STAINLESS-STEEL-FITTING-/320903892714
Does anyone have any idea on how can I mount the mic to the arm? Or where can I buy a thread reducer that goes 21mm female to 9mm female?
Thanks in advance and really looking forward for your suggestions.