Need a bit of help......

  • Thread starter Thread starter dafthunk
  • Start date Start date
D

dafthunk

New member
OK. I know you guys get a million questions from new users like myself... but please... any help would make me in debt to you forever.

Heres what I got:
Roland xp30
Logic Audio Win Pl.4.2
Behringer Eurorack MX802a
Delta Audiophile 2496

I bought the mixer and card yesterday, but have had the synth and logic for a few months now.

I got home today, and like a kid in a candy store, thought I would be able to figure out how to set up all this stuff.

I was waaaaaaaaay too naive.
My card is installed. that's as far as I got.

Soo, could one of you either point me in a direction as to where I can get some info on setting up my gear, or 'help a brother out'? I know it's not as simple as that, but i am very eager to learn, and just need to know where I can figure out which freakin $20 cord goes into where, so I can record both midi, and audio, and hear them both at the same time.

You can stop laughing now.
=)
PLease. and thanx.
 
alright, my man.

Your next step is to install your SOFTWARE. (assuming that your sound card is indeed correctly installed... software and everything) That should involve putting the disc in the drive... and hitting setup or something...can you dig it?

Now, Im not to hype on MIDI... but the MIDI OUT from your keyboard should go to the MIDI IN on your card... and the MIDI OUT on your card to the MIDI IN on your keyboard. As to the audio connects for your keyboard...I know what I'd try... but lets let some little MIDI head help you do that in an efficient and latency-free way.

ih, fuck it.. here's what I'd do, and latency be damned.

Run the stereo outs from your keyboard to ins 3 and 4 on your card.. run aux 1 and aux 2 on your MIXER to in 1 and in 2 on your CARD respectively. run a pair of 1/4" cords from OUT 1 and 2 on your CARD to the 7/8 in on your MIXER. (thats to monitor your mix) Run a pair of 1/4" cords from OUT 3 and 4 on your CARD to the 5/6 in on your MIXER..(thats to monitor keyboard only)

now heres the trick... in your Delta software... set it up so that ins 3 and 4 monito to outs 3 and 4... should be no problem.. and make sure the AUX SENDS on channels 5-8 on your mixer are all the way down.

THATs whatI'd do.

xoxo
 
Thanx both of you for your replies.
I think I got it figured out.
David - you got me straight on the cables. I replied to your email.

Camn - you got me straight on the card.

nice.

Thanks alot.


At least there were people here willing to help. Ive been having a hard time.

im out.
 
Back
Top