A
ahmedgarcia
New member
NO
There is no way to connect a firewire/usb 2 drive to the MX. Only ethernet and SCSI connectors.
To get to your firewire drive you have to go through your computer and then to your firewire drive.
Sorry
There is no way to connect a firewire/usb 2 drive to the MX. Only ethernet and SCSI connectors.
To get to your firewire drive you have to go through your computer and then to your firewire drive.
Sorry
P
Pierre
New member
Thank you
Thank you Ahmed for that "unfortunatly expected" answer!
Pierre
Montreal, Canada
Thank you Ahmed for that "unfortunatly expected" answer!
Pierre
Montreal, Canada
A
ahmedgarcia
New member
Pierre
Do you have an MX2424? If you do and if you need any help just post me or PM me.
Good luck
Do you have an MX2424? If you do and if you need any help just post me or PM me.
Good luck
P
Pierre
New member
Hi Ahmed,
I'm Re-recording assistant in post-prod. I work with Tascam MMR8/MMP16, MX-2424, DA-98, Protools, Augan and more..
I also have at my home a "bizard" setup with 3 soundcards (Gadgetlabs, SB and Yamaha) on my poor little pc... seam to work well and a VS-890 (Roland) for recording choirs...
Homerecording.com is a really good source of informations for me. I do not post often, but I read a lot of info in there (thanks all of you!)
With the MX-2424, I tried to figure out how can I cut the cost and gain in time for transfer/backup procedures. Rack Scsi drive is expensive, more than a Firewire. I saw on Tascam that they devellop a firewire interface for a digital console... was hopping they can do something for MX-2424...
Here, one movie can take up to 160 Gigs in digital sound informations (for all the tracks).. So, data management is my concern here.
Thank you for your offer. It goes both ways, if you need something too.
Sometimes, my english can sound "weird", I try my best!
Pierre
Montreal, Canada
I'm Re-recording assistant in post-prod. I work with Tascam MMR8/MMP16, MX-2424, DA-98, Protools, Augan and more..
I also have at my home a "bizard" setup with 3 soundcards (Gadgetlabs, SB and Yamaha) on my poor little pc... seam to work well and a VS-890 (Roland) for recording choirs...
Homerecording.com is a really good source of informations for me. I do not post often, but I read a lot of info in there (thanks all of you!)
With the MX-2424, I tried to figure out how can I cut the cost and gain in time for transfer/backup procedures. Rack Scsi drive is expensive, more than a Firewire. I saw on Tascam that they devellop a firewire interface for a digital console... was hopping they can do something for MX-2424...
Here, one movie can take up to 160 Gigs in digital sound informations (for all the tracks).. So, data management is my concern here.
Thank you for your offer. It goes both ways, if you need something too.
Sometimes, my english can sound "weird", I try my best!
Pierre
Montreal, Canada