Monitoring/routing problems

[puffin]

I am having problems hearing my Cubase click track through my headphones. i can hear it through my monitors fine, but I want to be able to hear the click track while recording. This is really annoying me.

I have a Delta 66; behringer 1202 mixer/preamp; Tannoy actives and a set of headphones. This is what I am doing at the moment;

1202 mixer > input 1
Tannoy actives > Outputs 1/2
AKG Headphones > Output 3

Also, only one side of the headphones is receiving sound. How can I set my gear up so that I can hear the clicktrack while recording?

Any help would be greatly appreciated!

Yours desperately

 

[Bulls Hit]

The answer lies in your Delta Control Panel.

In the Patchbay/Router tab, make sure the H/W Out 1/2 is set to Monitor Mixer.

On the Monitor mixer tab, adjust the Waveout 3/4 sliders to hear your click track. Check your mute switches are off

 

[puffin]

No click track from output 3/4

Thanks for the reply bulls hit.

I tried as you suggested, but I am still getting no outputs from 3/4. Here is my control panel is it is set at the moment;

Monitor mixer

Master vol -44dB
Wav out 1/2 0dB
Wav out 3/4 No output, no reading, NOTHING! Aaargh!

Patchbay

H/W out 1/2 set to Monitor Mixer
H/W out 3/4 set to H/W in 1/2

All mutes are off

I am just plugging the headphones straight into the breakout box output via an adapter that changes the tip of the mini jack into a TRS jack that fits the breakout box. Do I need a headphone amp? Could this be the problem?

What's going on???!!