Canare Star Quad is all I use. Look at the cut sheet here with a balanced wiring diagram. Long story short, the shield goes to pin 1, I send the two white to pin 2, and the two blue to pin 3. It has slightly higher capacitance than Mogami (which is the huge buzz word on why to buy one mic cable over another, though low impedance signals are hardly effected by capacitance in the lengths we use in the studio) ... but for the cost difference... you'll never hear the difference and it is dead quiet even around dimmers and I have several dimmers in my place. I always recommend Star Quad to home studio folks as you never know when the neighbors are going to turn on a hair dryer or the wife turns on the fluorescent light bolted to the ceiling in the basement... right under the floor where your cable is.
http://www.canare.com/files/Cat11_p35.pdf
I love nothing more than to spend a Saturday morning with a pile of connectors, some Canare Starquad, a hot soldering iron, some espresso, and my favorite PBS cooking shows. Makes for a good morning. Soldering cable is so incredibly easy and you get such a better product, you owe it to yourself to at least give it a whirl.