Manual for Tascam M-35

  • Thread starter Thread starter needledrop
  • Start date Start date
N

needledrop

New member
I just received my new M-35 mixer to go with my 80-8. The person that delivered it to me told me it was coming from Jackie "The Jokeman" Martling!!!
It's the mixer he mixed his live shows on.
Anyhow, I'm looking for a manual for it, and also none of the bulbs on the meters work, I was wondering where i could get new bulbs and how difficult it would be to replace them.
Thanks to all.
 
Gosh,...

I'm sorry, I meant to mention previously that Tascam Parts sells manuals for most of it's equipment, & they take phone orders @ (323) 727-4840.
 
Thanks alot A Reel.
It's going to take some time to digest all the info in that link!
Have you ever opened your mixer up? The headphone output isnt working on mine and i have to replace a few bulbs. Anything i should look out for?
 
No, I haven't.

It shouldn't be too much hassle to remove the bottom cover to access the headphone connector, but to replace the bulbs on the meters would be what I consider a major teardown. Even when you gain access to the meters, they have to be removed from their mountings, and the meters have to be popped apart individually. You might want to look for a fuse or a common connection to the meter lamps, before tearing headlong into it!!

PS: Have fun with the RS-20B!! :eek: ;)
 
PS: Have fun with the RS-20B!!

lol....you're keeping track nicely!!! no pun intended!!

Thanks for the tip on the fuse you're probably right, seems too odd to be ALL bad bulbs.
I'm having a tough time figuring out how to run this thing. The basics i have down. Everything seems to be working. But, I seriously think i'm going to need a manual to do more complicated patching.
 
Umm,...

I bid on that RS-20B in the last 10 seconds, and bumped yer ass up about $20!!

I'm sorry, I didn't check the user name first! I typically don't like to bid against people off this board, as a matter of common courtesy!! It was an oversight, I assure you! :o :eek: ;)
 
Tough to beat when my max bid was $1,000.71

just kidding!!!!
 
You must log in or register to reply here.
Back
Top