M Audio Monitors connecting Audiophile 2496

  • Thread starter Thread starter Keke
  • Start date Start date
K

Keke

New member
Please help.
Scenario: I bought a yamaha mm6 and tried to install the Cubase L3 software that came with it. Apparently in installing this software version 2005, it brought the settings back to square one. I am not sure how to proceed. The mixer I have is alto sx-6 and sound card is audiophile 2496 and m audio monitors. Where did I go wrong? Would someone be able to 'print screen' the settings for me for the M Audio setup so I can copy. This was I initially set it up before. Cubase sx3 and Reason is what i normally use for my beats.

Thanks
keke
 
Are the monitors powered?The outs on a 2496 don't supply power.
I would first try to play something in the media player and if that works the problem is with Cubase.

Also there should be a software control panel for the 2496,check the settings in there.
 
Settings

Yes I tried all that and nothing. No sound from current settings. If set to play in windows media player, nothing from monitors, but regular computer audio settings work well but not monitors. No sound from monitors at all. Intially what I did was copied the settings from someone else on this website. I cannot find that info anymore. I believe they had it on here as a print screen shot. So these settings worked before, plus since the issue I have been fiddling so I might have touched something without noticing. So here's what I have now.

On Control Panel:

Regular "Sounds and Audio devices": Audio: Sound Play back: M Audio Delta AP 1/2

M Audio Delta Control Panel:

Monitor Mixer: Master Volume: Stereo Link
Mixer Inputs WavOut 1/2: -27.5 - Solo x 2
WavOut S/PDIF: -23.0 -Solo x2
H/W IN S/PDIF: -22.0 -Solo x2
H/W In 1/2: 0.0 -Solo x2

Patchbay/Router: H/W Out 1/2: WavOut 1/2 & H/W S/PDIF: WavOut S/PDIF

Hardware Settings: Master Clock: Internal Xtak
Codec Sample Rate: 44, 100
MultiTrack Driver Devices: Single and In-Sync
Variable Signal Levels: Outputs: Consumer

DMA Buffer Size:
Latency: 768

S/PDIF:
Digital Output Format: Consumer

I am using Sound card M Audiophile 2496, Alto S6 Mixer and M Audio Monitors.
 
Back
Top