How to hook-up mpc,keyboard,and sound module?

  • Thread starter Thread starter DJ'FINGAZ
  • Start date Start date
DJ'FINGAZ

DJ'FINGAZ

Banned
Hey,I just came up on a producer set.I've purchased a mpc-2000,yamaha cs2x keyboard,and a planet phatt sound module....How do I hook it up so I can sync them all together to make a beat with all 3 together...
 
You'll probably need a mixer, unless you have one already, so you can hook up the three devices. Then you'll need MIDI cables to connect them via MIDI, as this is what you use to sync, control etc...
 
take the mpc and hook the midi out to the midi in of the planet phat. Take the midi in to the keyboard and hook it to the midi out of the mpc and and the midi out of the keyboard to the midi in of the mpc.
NOW go to the main screen and move the cursor down to drum and change it to midi. Move the cursor to the off and turn it to 1a.
move the cursor to pgm and select the pgm(sound) you want.
NOTE::::::
If you plug the keyboard into midi out a then 1a represents the board thus 1b will be the planet phat and vise versa. Hope this helps. Happy recording someone stole my mpc and planet phat.
 
You must log in or register to reply here.
Back
Top