JohnnyAmato
New member
So I've decided to put my first ProTools/Superior Drummer recording on hold for a bit, as I finish writing the lyrics. So I'm spending some time going through my group of 40 songs or so that I did on my Tascam with the old drum machine (Boss DR-770). Basically, I'm just going through the mixes one by one, so I can get them as solid as possible and be done with the group for good. Thanks to all who have given me mixing tips recently on some of them. But there are two or three songs I would actually like to do the drums over with SD. This one, "Hothead", is one of them. The drums are terrible, but I like the song and the guitars, and would hate to re-record it from scratch.
I know how to send the individual tracks from the Tascam to ProTools, but they wont be lined up meter-wise with the click track because when I did all of these recordings I would do all the drums on the drum machine itself, then just record the finished drum track to the Tascam on a stereo track. I would wait a second or two, the hit play. Meaning I never lined them up with the Tascam's click. I feel it would be very difficult to line up each track individually with ProTool's click, if I could select them all at once and move them as one I'm sure it would be easier. Should I even bother to try, or will it be too difficult? I just wanted some input before I start importing tracks to ProTools. Anyone ever done this before?
I decided to post this here because I would also like some input on the guitars in this mix; rhythms, leads, bass.
Hothead (Demo) | Johnny Amato
I know how to send the individual tracks from the Tascam to ProTools, but they wont be lined up meter-wise with the click track because when I did all of these recordings I would do all the drums on the drum machine itself, then just record the finished drum track to the Tascam on a stereo track. I would wait a second or two, the hit play. Meaning I never lined them up with the Tascam's click. I feel it would be very difficult to line up each track individually with ProTool's click, if I could select them all at once and move them as one I'm sure it would be easier. Should I even bother to try, or will it be too difficult? I just wanted some input before I start importing tracks to ProTools. Anyone ever done this before?
I decided to post this here because I would also like some input on the guitars in this mix; rhythms, leads, bass.
Hothead (Demo) | Johnny Amato