L
LP2006
New member
Ok, heres the deal. I recently bought a Fender MX5200 console off ebay. Just so everyone is absolutley clear abought the manner and condition the mixer was advertised in, here's the link: http://cgi.ebay.com/ws/eBayISAPI.dll?ViewItem&item=7375090437&rd=1&sspagename=STRK:MEWN:IT&rd=1
I paid in the form of a money order. Shipping was over $80.
Well, first thing that happened that ticked me off, was that i recieved the console and power supply, but not the cable needed to connect the two. So at that point it was impossible for to test whether the thing even worked or not.
Plus, remember those nobs that were labled as "damaged but work" in the link? They were completley disconected from the circuit board pots and all. I had to open the board up to reconnect the pots.
A week later (today), I recieved the interconnect cable. I went downstairs, plugged her in, and the first thing I notice is the power supply fan was hardly spinning. But power was going into the mixer! I plugged a mic into channel one, set my gain, flicked on the send to mains switch, and brought up my faders. Nothing. Not a sound (other than hiss). Out of pure curiosity i turned on the solo switch on channel one. Suddenly i can hear my self tapping the mic. At this point I am extremely confused (and thinking routing problem). So i power her down, and power back up. i checked all the mute and solo switches on the board, and noticed channels 17-24 don't even work.
Again, I power down and then power back up. No lights are on this time, then all of them flicker and i'm smelling electrical fire. i immediatley power down.
For the last time, I powered up again and noticed every single PEAK LED solid red.
I was thinking about making the seller an offer: Either he agrees to pay for repairs on the board in full, or he returns my money in full including shipping both ways.
Or, i make a complaint on ebay, give him bad feedback, and apply for mail fraud (i can do that since I paid with a money order right?)
Overall, im just looking for some advise on what to do now, or how to fix the damn thing.
I paid in the form of a money order. Shipping was over $80.
Well, first thing that happened that ticked me off, was that i recieved the console and power supply, but not the cable needed to connect the two. So at that point it was impossible for to test whether the thing even worked or not.
Plus, remember those nobs that were labled as "damaged but work" in the link? They were completley disconected from the circuit board pots and all. I had to open the board up to reconnect the pots.
A week later (today), I recieved the interconnect cable. I went downstairs, plugged her in, and the first thing I notice is the power supply fan was hardly spinning. But power was going into the mixer! I plugged a mic into channel one, set my gain, flicked on the send to mains switch, and brought up my faders. Nothing. Not a sound (other than hiss). Out of pure curiosity i turned on the solo switch on channel one. Suddenly i can hear my self tapping the mic. At this point I am extremely confused (and thinking routing problem). So i power her down, and power back up. i checked all the mute and solo switches on the board, and noticed channels 17-24 don't even work.
Again, I power down and then power back up. No lights are on this time, then all of them flicker and i'm smelling electrical fire. i immediatley power down.
For the last time, I powered up again and noticed every single PEAK LED solid red.
I was thinking about making the seller an offer: Either he agrees to pay for repairs on the board in full, or he returns my money in full including shipping both ways.
Or, i make a complaint on ebay, give him bad feedback, and apply for mail fraud (i can do that since I paid with a money order right?)
Overall, im just looking for some advise on what to do now, or how to fix the damn thing.