Dropped CAD E300 2

[Relakst]

I just received a "slightly used" CAD and, alas, it had to have been dropped. The basket is bent, there is a tiny dent where the basket hit the mic case, and the capsule is leaning slightly to the side of the dent. Granted, the capsule is rubber mounted and probably could be straightened.

I haven't had a chance to try it yet. What sort of damage could have occured? Could it have messed up the capsule's ability to perform normally?
Worried

 

[MadAudio]

I'd be worried, too. That doesn't sound good. Do you think it was dropped in shipment or sent that way? Did the seller say it was working? If it was me, I'd be nervous to test it, fearing I'd cause more damage.

 

[Relakst]

Supposed to have been "mint". How could trying it out cause more damage?

 

[MadAudio]

Supposed to have been "mint". How could trying it out cause more damage?

Well since condensor mics use phantom power, there's a slight possibility of frying the capsule if there's a short somewhere. BTW, I have the original version of the E300, and that one uses phantom in conjunction with an internal battery. Is the E300/2 the same? I haven't actually seen one.

 

[Relakst]

Yes, it is the same setup. So I will make sure it has some charge before I try it out. You can see it at http://www.cadmics.com/e300_2.htm. I'll use my AT4050 to compare.

 

[MadAudio]

Yes, it is the same setup. So I will make sure it has some charge before I try it out. You can see it at http://www.cadmics.com/e300_2.htm. I'll use my AT4050 to compare.

Wow, that's a lot more compact than mine! Good luck!

 

[Relakst]

Weighs a ton, though. Gonna haff ta use the boat anchor on the other end of the boom... which is prolly why it was dropped in the first place... DAMN!

 

[PhilGood]

I think the only damage that could happen would be if the shock of the drop caused the diaphragm to stretch or come loose. Then it would just sound like pooh! The capsules usually are charged to about 60-70 volts in a tube mic, depending on how its biased. On 48v phantom, its probably there or lower so the voltage really couldn't hurt it. All the solid state components really can't be damaged by shock so the only real damage would be mechanical.

Does the capsule move when you turn the mic?

 

[Relakst]

No, it doesn't move. I was able to make it straight very easily with my fingers. I guess it was made to move a bit to take some shock.

 

[PhilGood]

I think its probably safe to try it.

 

[versimilitude]

there's a slight possibility of frying the capsule if there's a short somewhere

*cough* *crap* *cough *cough*

another "quality" post you're nearly up to 3,500 now

 

[MadAudio]

*cough* *crap* *cough *cough*

another "quality" post you're nearly up to 3,500 now

Wouldn't it be better to correct me than belittle me? Please tell me why I'm wrong - I'm always learning.

 

[timboZ]

Post #1 from versimilitude...

And I give you and A+ and a gold star for effort

15 posts out of 42 and you only replied to yourself 7 times you're definitely cominginfirst

Post #2 from versimilitude...

*cough* *crap* *cough *cough*
another "quality" post you're nearly up to 3,500 now

Post #3 from versimilitude...

I am an A-hole. I know nothing.

Christian and Ted are my lovers.

V-tude all of your quality posts have helped me out.
Go away A-hole.

 

[PhilGood]

*cough* *crap* *cough *cough*

another "quality" post you're nearly up to 3,500 now

What the....???

Well, fuckadoodledo!! Who are you??

Mad, pay him no mind! I think you gave good advice! Always err on the side of caution.

 

[tourettes5139]

*cough* *crap* *cough *cough*

another "quality" post you're nearly up to 3,500 now

Come on!!! Thats just ridiculous.

Wouldn't it be better to correct me than belittle me? Please tell me why I'm wrong - I'm always learning.

Ironic how he's the one that the aforementioned cockfag was being rude to, and he's still being nicer than most of us. Props!!

 

[Relakst]

Um, ya... well, anyways...END RESULT: A dropped CAD E300^2 sounds.... UNBELIEVABLE!!!! WOW! JUST......... WOW!!!*

*(don't try this at home, see dealer for details, not for the faint of heart, not necessarily as shown, not a CAD dealer, not a CAD dropper, not an argument starter, etc.)

 

[MadAudio]

Um, ya... well, anyways...END RESULT: A dropped CAD E300^2 sounds.... UNBELIEVABLE!!!! WOW! JUST......... WOW!!!*

*(don't try this at home, see dealer for details, not for the faint of heart, not necessarily as shown, not a CAD dealer, not a CAD dropper, not an argument starter, etc.)

If it's anything like the original, you will LOVE that mic for a long time. I just started using mine in conjunction with a cardioid to do mid-side micing.

ENJOY!

 

[Relakst]

Thanks... I couldn't be happier with the sound... as with the 4050, no need for EQ (the equipment, not the magazine*). I'd call it a more colored sound than the 4050. Or maybe the 4050 just doesn't "hear" as well. Anyways, my acoustic guitar just shimmers! And this thing is supposed to accel on vocals. I can't wait to try THAT.

I'm guessing not many people have this mic. I've seen very little on the net about it. The little I did see was very positive so that's why I bought it. Oh, and it was a quarter of the price of new in Canada! That helped.

*not an EQ editor, not a roadie