Delta 66 card help

[coolsoundman]

Previously I posted the inquiry of the delta 66 audio card. I have that card now and I connected my mixer board to the 4 inputs of the card. What's funny is that when I set my card mixer to two of the subs out, I only get one side that is louder than the other. Anyone know how to get the other side to equal out with the other? It's the left side that is louder than the right.

 

[scrubs]

check in the m-audio monitor mixer to make sure the faders are set correctly and stereo linked.

 

[coolsoundman]

Ok, I think I got the channel inputs going, and I'm getting the playback in my monitors. The 4 in's are working with the hard l/r panning on the mixer. My output's is a different story. Like I said, I could hear the playback in my monitors and that is using the 1/2 out put connections. I have the 3/4 connections and I'm trying to get those to used for the playback in for the musicians can hear the playback in another room. So I went back into the software of the soundcard and I clicked on the 3/4 output and I can hear myself speaking into a mic through some headphones. the only thing that I don't hear is the playback music that is already recorded in the headphones. Any suggestions?