RICK FITZPATRICK
New member
Hello everyone. In the course of getting the shop ready to build, I had to start moving all my studio fixtures up into my "womb". The first step is the plan. The analog studio plan. This is more of the acoustical stuff. But it has to do with orientation of my homemade console/floor. When I say floor, this is a temporary "floor" module that allows use of the console in a temporary situation. That is because the leg/cable chases brackets are mounted on them. Once they are situated, I lay the cableling through them, mount the OSB covers, cover with carpet, and then mount the legs, with cables up through them. Lots of them. All different types. Power, midi, Line level, mic, antenea, cable, etc.
I havn't even finished the studio plan yet, but I have to get these parts out of the shop, so I thought I would share the "installation" of my custom console from the ground up. Might give you some idea of what I am building. I'll post the plans on the Studio Building forum in a few days. I'll post the plans and pics of the console here, because it is ANALOG oriented. Some digital, for my CAD workstation.
I start work tomorrow Great location to work. 10 miles from anything. 100' from the Oregon coast/beach. Beautiful. I worked there Wed and the weather was too good. The greenhouse were building out is 10 mile out of Port Orford.
Anyway, here are some links showing the view from where the console will be and the first 3 modules of the floor/brackets. I'll take pics as I bring up each piece and install it. Sorry for the long post. But I gotta talk sometimes.
The room is a disaster as I just moved a ton of boxes in. When I post the plan, I have a bunch of questions that I need your opinions on.
Till then, heres the pics of my temporary space. Second floor, looking north out the sliding glass door of the studio.
fitZ
I havn't even finished the studio plan yet, but I have to get these parts out of the shop, so I thought I would share the "installation" of my custom console from the ground up. Might give you some idea of what I am building. I'll post the plans on the Studio Building forum in a few days. I'll post the plans and pics of the console here, because it is ANALOG oriented. Some digital, for my CAD workstation.
I start work tomorrow Great location to work. 10 miles from anything. 100' from the Oregon coast/beach. Beautiful. I worked there Wed and the weather was too good. The greenhouse were building out is 10 mile out of Port Orford.
Anyway, here are some links showing the view from where the console will be and the first 3 modules of the floor/brackets. I'll take pics as I bring up each piece and install it. Sorry for the long post. But I gotta talk sometimes.
The room is a disaster as I just moved a ton of boxes in. When I post the plan, I have a bunch of questions that I need your opinions on.
Till then, heres the pics of my temporary space. Second floor, looking north out the sliding glass door of the studio.
fitZ