Attack and Release

  • Thread starter Thread starter hookiefree
  • Start date Start date
hookiefree

hookiefree

New member
I get the theory but I can't tell the difference if the attack is set low or high. The same with the release. What am I missing? Does that mean I need to compress harder or something?
 
If the attack is too slow then you will hear the sound get loud and then suddenly drop in volume. If the release is too slow you will hear the sound drop in volume then slowly get louder.

If you aren't hearing a difference then you probably are using very light compression. Just to experiment turn the ratio to 10:1 or higher and lower the threshold until you see at least 8db of compression on the meters. What compressor are you using?
 
i'm using waves rennaisance. i'll play around with it more when my PC gets fixed.
 
ummm help!!!

hookiefree said:
i'm using waves rennaisance. i'll play around with it more when my PC gets fixed.


ok i am sacared, maybe you will see this messege, and probably ignore it but , I NEED HELP!!!! i despretly want to be a singer but i have no conections and can't even find a decent vocie teacher, and above that i have no support what so ever!!!!! please give me some advice , i need help....

umm, and i don't understand anything you are saying by the way....
 
Re: ummm help!!!

mary said:
ok i am sacared, maybe you will see this messege, and probably ignore it but , I NEED HELP!!!! i despretly want to be a singer but i have no conections and can't even find a decent vocie teacher, and above that i have no support what so ever!!!!! please give me some advice , i need help....

umm, and i don't understand anything you are saying by the way....

:D Zeke!Stop trolling dude!LMAO
 
huh??

WHAT DO YOU MEAN "STOP TROLLING DUDE!!!!" maybe you haven't noticed but to me this is kinnda importatnt, so it is help i wan't not people teling me to "stop trolling"....whatever THAT means....

mary..
 
Re: ummm help!!!

mary said:
ok i am sacared, maybe you will see this messege, and probably ignore it but , I NEED HELP!!!! i despretly want to be a singer but i have no conections and can't even find a decent vocie teacher, and above that i have no support what so ever!!!!! please give me some advice , i need help....

umm, and i don't understand anything you are saying by the way....

Mary, I'm a big time producer. If you're cute you can come stay with me for a few days and we'll cut a demo or something. I can teach you french vowels and all that shit. :D

uhhh, you're over 18, right?
 
okey..

one would think that they would take you sirusly or some thing but no. to you wierd peolpe all i an saying is a joke. news flash!!! it's not!!! i really want to be a singer and i know french!!!! not that it matters anyway, not like i'm geting any help....

mary.
 
and!!!!

what does it matter if i am cute or not?!?!?!?!?!!?
and no i am not over 18!!!!!


mary
 
what is your problem?

so now if i want to say waht i am thinking i am bored, my firts language has always been english and i bet i have a better pronunciation than you , so if i want to saty in thsi forum, i will stay untill maybe some one decent will answer want i have been wanting to hear for a long time, a sine of hope.

so leave me alone.

mary..
 
Re: what is your problem?

mary said:
maybe some one decent will answer want i have been wanting to hear for a long time, a sine of hope.


thats why I gave you the link, sweetness
Ok, no Spanish, Fine. How about lurking around here for awhile to learn some stuff, and not sassin' back on people that are trying to help you...

unless you're a troll. (if so, you really need to work on your troll skills dood)
 
oh my, i feel so happy now!!!

oh god thank you so much for the great help you gave me , i feel so inspiered!!!! really thank you!!!!

ummm NOT!!!

what do you mean stop "sassin' back at people who are trying to help you"???????
i mean aere even reading waht you are writing, so stop you know.it-all coments. cuz they are no help.

i am not a troll

mary
 
Hey Mary.

I takes a bit to understand compression well and I assume this is part of your the problem your having with the attack and release. Depending on what your applying the compression to, settings can have quite a large range. Though I'll try and give you some starting points.

The threshold is where the compressor starts working so this setting is important in order to hear what is being done to the file that is being compressed. If your a vocalist then I'm going to assume that your applying compression to a vocal so try this starting point. Compress at a ratio of 5:1 keeping your attack fast(around 1-10ms) and your release at about 250ms adjusting the threshold and keeping an eye on the reductions meter as to how much your compressing.

This is just a starting point but I think you can be on your way using these settings.

Good luck,
sonicpaint
 
Mary- This is a discussion on attack and release, which are parameters or settings used in compression, which is an electronic tool for controlling dynamics in recording, that is, limiting the extent that a signal gets louder and quieter. You need to post your question either in the newbies forum, or in the event forum, which has been hijacked by the singers around here. Somebody, possibly myself, will try to help you. We will admit to being confused that your member profile says you are from Columbia, but you say your primary language is English. Could that be like, Columbia, North Carolina?
And a troll is a person without a life that gets their kicks by pushing people's buttons because they're bored. If you are not one of those, we'll figure that out, and you will get help. You just need to start your own thread, instead of jumping into a discussion on the finer points of compression. Hope this helps.-Richie
 
Crank the threshold right down, set the compression ratio to it's maximum, set the attack to the smallest/shortest setting and set the release to it's longest setting. Now play around with the attack time and see what happens.

Messing with extreme settings makes it easy to hear their affects.
 
sorry

ok i am so sorry realy it wasn't my intension to bother you both, but befor was nt a good day for me, many people withdrwe their confidence in me. so realy i hope you undersantd me:

no i am not from columbia, its colombia, barranquilla colombia, and most of the people here speak spanish but i like english better, never mind that, i am realy sorry, i'll take your advice.


i just really did not like what the othere guys said...so sorry....
 
sorry

ok i am so sorry realy it wasn't my intension to bother you both, but befor was nt a good day for me, many people withdrwe their confidence in me. so realy i hope you undersantd me:

no i am not from columbia, its colombia, barranquilla colombia, and most of the people here speak spanish but i like english better, never mind that, i am realy sorry, i'll take your advice.


i just really did not like what the othere guys said...so sorry....


and i am not a troll...
 
sorry

ok i am so sorry realy it wasn't my intension to bother you both, but befor was nt a good day for me, many people withdrwe their confidence in me. so realy i hope you undersantd me:

no i am not from columbia, its colombia, barranquilla colombia, and most of the people here speak spanish but i like english better, never mind that, i am realy sorry, i'll take your advice.


i just really did not like what the othere guys said...so sorry....


and i am not a troll...
 
sorry

ok i am so sorry realy it wasn't my intension to bother you both, but befor was nt a good day for me, many people withdrwe their confidence in me. so realy i hope you undersantd me:

no i am not from columbia, its colombia, barranquilla colombia, and most of the people here speak spanish but i like english better, never mind that, i am realy sorry, i'll take your advice.


i just really did not like what the othere guys said...so sorry....


and i am not a troll...
 
Back
Top