8 Channel Level Adjuster?

  • Thread starter Thread starter lelio98
  • Start date Start date
L

lelio98

New member
Does anyone know if there is, and who makes, an 8 channel level adjuster. Here is what I want:

1. 8ins - 8outs
2. 8 Volume Knobs
4. 8 meters would be nice

Basically I want a really simple 8 bus mixer that doesn't mix the signal. Just need something to control the level going into some recording equipment (Delta 1010). I know the 1010's software does this, but I don't like using a mouse to adjust sliders.

Or maybe, a control surface for a Delta 1010?

Thanks!!!!
 
you may not like the mouse, but if you go off buying a cheap mixer just to avoid it, you are seriously underming the quality of the Delta 1010......so unless you can afford a good mixer, i wouldnt suggest doing it....

with that said, what kinda budget are you looking at to do this?...
 
I'm looking for the same thing, but my reason is because I'm getting a hot signal from a mixing board at a venue i can't adjust. So the only thing i found is a Behringer 4-channel Compressor/Limiter MDX4400.

I hope this works for me, its only $100 also, good price for my budjet i don't have.
 
It sounds like you want a mixer with 8 direct outs. The Soundcraft M8 would be a good choice. I wouldn't use anything cheaper than that. Are these all line level sources or mics also? If they are mics than you need preamps and that is another reason a mixer would work best.
 
I know the 1010's software does this, but I don't like using a mouse to adjust sliders.
Click to expand...
A control surface will do that. Like the us428 for example. And it is possible to just use the control features and just use the 1010 for the sound.
 
You must log in or register to reply here.
Back
Top