Search results

my set-up right now is a mackie onyx 1620 with the firewire option. the first 8 direct outs go to my otari 8-track 1/2" tape machine. - so ideally i like to track to the computer and to tape simultaniously. when i want to play back the tape, however, i have to unplug all my mics and plug in the...

i use a mackie onyx 1620 with firewire as my interface, and it only draws one stereo signal from the computer. i want to get into re-amping and the way i had it figured i would have to have at least one more output to run to the amp in order to hear the re-amped signal and the rest of the song...

from reading earlier posts i haven't been able to figure out an answer to this question. if i run a recorded guitar signal from my interface or tape machine into the output of my d.i. box, and run from the input of the d.i. to the amp, will it work. will the d.i. raise the impedence back to an...

i am using a motu midi timepeice a/v (paralell version) to sync my otari tape machine to my daw(traktion). when i install the motu software (clockworks) i start to get pops in my recording - so i reinstall my mackie onyx (1620 with firewire) software. this fixes the pops, but clockworks wont...

hi - i am renting a space that was built to be a studio. it has a big live room and two isolation booths. we turned one of the booths into a control room. the first acoustical problem that we have encountered is that the booths are not soundproofed - hardley at all. they were poorley designed...

I'm looking for a neumann km-184 or maybe a stereo pair - thanks ben

does a smpte signal have to be balanced?

im running the direct outs on my onyx 1620 (db25) to my otari mx5050 mkIII tape machine, which is unbalanced pin-3 hot. will this just reverse the phase? thanks - you guys are so helpful

I have not seen this poll posted and I thought it would be a useful one.

when your intended medium is a cd, what sample rate do you record at, and why?

i have an otari mx 5050 mk III and i dont know how to clean it. - if you could send me a thread/website/instructions to look at that would be great. thanks

im looking for a midi interface that reads/writes SMPTE thanks

can i sync my mx5050 mkIII with my computer? what equipment do i need? thanks, ben

can i sync my mx5050 mkIII with my computer? what equipment do i need? thanks, ben

i want to get a dual head video card so i can run 2 monitors. does the quality of the card matter? - there are many REALLY cheap ones available. what am i sacrificing. what should i look for.

so i just got the mackie 1620 w/ the firewire to replace my tascam us-428. the mackie does not have midi inputs on it so i have to buy a seperate midi interface. does the brand/model matter? does the latency have to do with my midi interface or my soundcard/audio interface/drivers? tahnsk so much

so i ordered a mackie onyx 1620 with the firewire expansion card. I also have have an otari mx5050 mkIII eight track. I want to use both at the same time. (record to the otari and then drop it to the computer for mixing) i am trying to figure out how to wire it. i can run the direct outs for the...

so my plan is to use the inserts on my mixer to run to my otari mx5050 mkIII for recording. and the outs on the otari back to the mixer for monitoring and eventually bumping to my computer for mixing. i found cables at hosa: stereo 1/4 to 1 female xlr and 1 male xlr. Do i need to rewire the...

very newbie question: I have an at4033, where does the cardioid response originate from. meaning, what direction from the mic. for example, with sm57, it is the direction the mic is pointed. because the 4033 is side-adress, does that mean the response is on the side of the mic. the side with the...

so my plan is to use the inserts on my behringer xenyx 2442fx to run to my otari mx5050 mkIII and back to the mixer for monitoring and eventually bumping to my computer for mixing. i found cables at hosa: stereo 1/4 to 1 female xlr and 1 male xlr. Do i need to rewire the cables, because the...