Search results

have you tried altering the latency after you have done all the tracking when mixing there is little point burning up cpu power on low latency.

i have 4 gb of memory in my xp machine and get 3.2 usable in the device manager and also in the bios with my uad 2 card installed if i put the uad 1 card in the memory drops to 2gb at boot up and also in the bios and in windows even with the 3gb switch enabled and the 3GB /Userva=2900 added so...

Mac's are known to have a hyped low end while PC's are more scooped in the mids could that be more down to the file format that the daw works on rather than the h/w in the pc/mac or operating system. aiff and wav :confused:

why do people allways say i dont own it so i can not treat it ? i made some free standing bass traps like this cut a 600mm square piece of mdf ,cut it into 2 triangles,this will make the top and bottom. i then cut another piece 1200x600 in half to leave 1200x300 these made the back. i cut...

this is what i use RESERATOR1 V2 Fanless Water Cooling System (w/WB5+) had for 4 years now and still silent my setup is that quiet that i know the transformer on my sound card need to be replace and it 2 foot away from me in a rack. motu 24i/o. gerr.... dam transformer lol

have you thought about water cooling very quiet and then only requires a few small fans to keep everything else cool.Bigger fans at slower speeds are quieter than smaller ones spining faster to move the same amount of air. i have one of these PaQ - PC quiet cases - Information but mine runs to...

what is yopur total budget ? a mixter may not be the best use of your money a sound card with multiple inputs may be better. if your looking at a pod i'd go second hand there built like a tank.

how big is the room ? what instruments are you going to record ? how close is the nearest house or are you trying to isolate it from the rest of the house ? what room is above the cellar ? have you considered something like this http://www.esmono.co.uk/ least if you move you could take it...

the shipping price tell you they weigh nothing bass traps require mass which unfortunatly is heavy, so an 8 pack shipped for $12 is very light. $12 = £7 royal mail standard parcel = 4kg bass traps are normally 25-50 kg per m3 build your own with rigid fibreglass works out alot cheaper

when you say its muddy ,you could try stripping it right back start with 2 tracks and start adding the others until it starts to sound muddy ,then look at the eq of all the tracks you have and remove some of the low end of some of the tracks to leave the sounds you want to hear.

am i missing something or are audio/video cables completely non directional and the cables i bought from Qed and both video and speaker cable with instructions to fit only in one direction a crock of shit , to make their product seem better than it was ?:confused:

ok without tearing it down ....................................... how high is the ceiling out side the booth ? just wondering about removing the top and fitting a cloud above the booth. i dont know if this would make the booth bigger in an acoustic sence :confused: since the sound can escape...

if its 5 x 5 x 9 then some of its problem will be its square on 4 sides which i'm no expert is a problem . The foam is not dense enough to tame it. the problem is that 703 4" thick might not be enough and by the time you get enough in there. there will proberly not be alot of room left. it...

The best place to look or ask that question would be on the vdrums website forum. I remember Reading a thread about that a while ago on there

sorry i didn't explain very well before i started the test room spl 44db started test 50-110hz the spl rose to 55db at the begin of the test and never really altered. after 110hz the and up to 300hz the meter increased from 55db and read up to 70db at its higest point. i will run the test...

thanks for the link glen just read it and have measured my mixing position and will have to move it a little bit for optimum position.

just to confirm is +/-6db is that a total of 12db for a nice room +/-10db total of 20db for a fairly typical room i ran a quick test this morning just a spl meter at the mixing position and at low monitoring levels the total amount of movement was 15db it read 55db of sound at 50-110hz and...

if he does this it wont read the hirens disk and it will go straight to the black screen

what is classed as good for the spl rise and fall of a room ? i will run some more tests today at various volumes to give an average to the peaks and nulls

when you boot up normally do you get as far as the windows logo ? if you only get the vio screen and the post screen then blank this is where windows is looking for the boot drive ,check your bios that the boot devices are correct 1 cd/dvd rom 2 hard drive if this is correct then you could...