Search results

  1. S

    Tascam m320 hybrid setup

    Hi everyone, I've recently got my m320 working and now comes time to set it up with the rest of my gear. I'm looking to incorporate it with my converters which are basically two 8 channel audio interfaces (I'll be looking to add another to utilize all channels) and use it with my daw(reaper)...
  2. S

    Tascam m320 for hybrid setup

    I have to interfaces I'm using for the converters, one is a presonus audiobox 1818vsl, and the other is a focusrite scarlett 18i20, i've used both interfaces with reaper before with no problem, but never in line with a mixer.
  3. S

    Tascam m320 for hybrid setup

    Hi everyone, I’ve got a Tascam m320 console and a couple converters I’m trying to get to work together in my daw. I’ve been plugging mics into the mic in on the mixer, routing the direct out to the input on my converter and then the output of the converter back into the line in on the console. I...
  4. S

    Tascam M320 phantom power question

    Extremely helpful! I’d probably not be using more than 5 condensers at a time so I might not go through all the trouble if all I have to do is get an external unit, but this is the info I was looking for just out of curiosity! Thanks Sweetbeats
  5. S

    Tascam M320 phantom power question

    Hi everyone, I have an M320 I recently got working and being that it is not the M320b I don’t have phantom power. What’s the best way to add it? Is it as simple as buying an external power supply my condensers and is there anything that needs to be upgraded in the console itself? Or is there...
  6. S

    Tascam M320 question

    I'm looking to find a replacement connector for the bus C pcb on my m320. I believe the connector is the issue as I get a reading from the jump wire connecting to the front pin on number 12 but not to the pin that's soldered to board. the connector in question is to 10 pin male connector (P546)...
Back
Top